Summary of Contents for TERMEX VT-TMP
- Page 1 HEATING CONSTANT TEMPERATURE BATH “VT-TMP” Operating manual Before using this instrument, carefully read the operating manual.
-
Page 2: Table Of Contents
“VT-TMP” heating constant temperature bath Operating manual TABLE OF CONTENTS Introduction ......................3 Intended use....................3 Appearance and parts names ................3 Environmental Conditions .................4 Safety Recommendations..................4 Using The Heating constant temperature Bath............5 Preparation .....................5 GENERAL SPECIFICATIONS ...................6... -
Page 3: Introduction
ASTM D130 and ISO 2160. Appearance and parts names Heating constant temperature bath “VT-TMP” consists of: 1 - Heating immersion circulator “M01”; 2 - Stainless steel bath tank with adapter for test thermometer 3. -
Page 4: Environmental Conditions
“VT-TMP” heating constant temperature bath Operating manual The operating principle of the bath is based on supporting a preset constant tempera- ture of flowing thermal fluid in the bath tank and providing a good temperature uniformity of the operating bath. The circulation of thermal fluid... -
Page 5: Using The Heating Constant Temperature Bath
“VT-TMP” heating constant temperature bath Operating manual USING THE HEATING CONSTANT TEMPERATURE BATH Before using bath circulator, carefully read the operating manual. Preparation Carefully select a spot for installing instrument with free air access for the circulator ventilation. Make sure it is far away from any kind of heat source. -
Page 6: General Specifications
“VT-TMP” heating constant temperature bath Operating manual GENERAL SPECIFICATIONS +20…+100 °С Working temperature range: Set-point resolution 0.01 °С Display resolution 0.01 °С Temperature stability ±0.1 °С ±0.1 °С Temperature uniformity Digital setting accuracy ±0.5°С Digital setting repeatability ±0.05 °С Heating capacity...