IMPORTANT SAFETY INFORMATION: WARNING: To reduce the risk of serious injury, read the following important precautions before using this Bicycle Exerciser. 1. It is the responsibility of the owner to ensure that all users of the exerciser are adequately informed of all warnings and precautions.
ASSEMBLY INSTRUCTION: EXPLODED-VIEW ASSEMBLY DRAWING: STEP 1: Attach the rear strut. Remove the indicated end cap from the rear of the main frame(part A). Discard it. Slide rear strut (part B) into the rear of the main frame (part A) , screw in 4 Phillips screws, securing rear strut to main frame.
Page 4
STEP 3: Attach the handlebars.Remove the screw, nuts and washers from the rotation rod (part N). Slide STEP 5: Mount seat (part F). Remove nuts and washers from studs on bottom of seat (F). Place seat onto seat post (G) handlebar rotation rod through the linkage tube at the top of main frame.
OPERATION: 1. LEVELING THE BICYCLE EXERCISER. Place the BICYCLE EXERCISER in the location it will be used. The floor should be hard and flat and the bike should sit firmly on the floor. If the bike is not stable, turn the end caps on the front strut (part C) until the bike is stable.
Page 6
2. SPEED LOWER BODY WORKOUT Press the button until the ARROW points to SPEED, the monitor will display the current speed. To convert your cycle for CYCLE ONLY mode, simple remove the pedal-link arm lock ring, the C Clip, from each pedal and disconnect the left and right hand Link Arm from each pedal. At this point 3.
Page 8
6. Lifelong total liability for damages relating to or arising accident, negligence or improper handling. out of the purchase or use of the product regardless of d.
Need help?
Do you have a question about the FIT LITE and is the answer not in the manual?
Questions and answers