dg casa 60050-FLMP Assembly Instruction

Important Safety Instructions:

• This floor lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with
an extension cord unless plug can be fully inserted. Do not alter the plug. Do not attempt to defeat this
safety feature.
• These instructions are provided for your safety. It is very important that they are read carefully and
completely before beginning the assembly and use of this floor lamp.
• This floor lamp has been rated for up to one (1) Three-Way 100-watt maximum TYPE A standard
incandescent light bulb (not included). To avoid the risk of fire, DO NOT EXCEED THE
RECOMMENDED LAMP WATTAGE.
• Use with provided shade only for correct lamp-to-shade spacing.
• This floor lamp is intended for indoor use only.
• Save these instructions.
WARNING:
• To reduce the risk of fire, electrical shock or personal injury, always turn off and unplug the floor lamp
and allow it to cool prior to replacing the light bulb.
• Do not touch bulb when floor lamp is turned on. Do not look directly at lit bulb.
• Keep flammable materials away from lit bulb.

Pre-assembly:

• Remove all parts and hardware from box along with any plastic protective packaging.
• Do not discard any contents until after assembly is complete to avoid accidentally discarding small
parts or hardware
60050-FLMP