Page 1
Solid Pine Storage box on Wheels with 3 Drawers 238/5211 Assembly Instructions - please keep for future reference Dimensions Width - 70cm Depth - 40cm Height - 43cm Important – Please read these instructions carefully before starting assembly...
Page 2
Safety and Care Advice Important – Please read these instructions fully before starting assembly We do not components and tools listed on the product, this could cause recommend the page 1. damage. use of power drill/drivers for inserting screws, plastic bags and separate them as this could damage the unit.
Page 3
Components - Panels Please check you have all the panels listed below Side panel x 2 Front panel x 1 Back panel x1 Bottom panel x 1 Boxes panel holder x 2 Lid panel x1 Components - Fittings Note: may be supplied than are required. Screw x2 Hinge x2 Chain x1...
Page 4
Assembly Instructions Step 1 Connect the back panel on side panel Then connect the boxes panel holder on the side panel to with screws Step 2 Connect front panel on the storage. Fix the side panel on the storage using screws...
Page 5
Assembly Instructions Step 3 Place the boxes panel holder under the storage using 4 screws To complete, place the bottom panel 4 inside the storage. Step 4 Fix hinges locations marked on the back of the back panel, then attach the lid panel with screws B .
Page 6
Assembly In Step 5 Put the 4 wheels D in their location under the piece of furniture. Place the 3 boxes in in the bottom of the solid pine storage. Assembly complete.