Fixing The Product; Maintenance And Cleaning; Disposal - Parkside PALA 2000 A1 Operation And Safety Notes

Fixing the product

The product can be used in 2 ways without having to hold
it in your hand:
Hold the magnet
base
product remains in this position. You can tilt the
product up to 180 ° on the magnetic base
CAUTION! Please note the position of your hands
whilst turning the magnetic base
pinching your fingers (see Fig. B).
Fold out the hook
suitable suspension point. The hook
through 360 °.

Maintenance and cleaning

The product requires no maintenance. The LEDs cannot be
replaced.
Switch off the product and disconnect from the USB
power supply before cleaning.
Never immerse the product in water or other liquids.
Never use caustic cleaners.
Regularly clean the product with a dry, lint-free cloth.
Use a slightly moist cloth to remove any stubborn dirt.

Disposal

The packaging is made entirely of recyclable materials,
which you may dispose of at local recycling facilities.
b
a
12 GB/CY
5
against a metallic magnetic surface. The
9
4
Observe the marking of the packaging materi-
als for waste separation, which are marked with
abbreviations (a) and numbers (b) with follow-
ing meaning: 1–7: plastics / 20–22: paper
and fibreboard / 80–98: composite materials.
The product and packaging materials are recy-
clable, dispose of it separately for better waste
treatment. The Triman logo is valid in France only.
at the back or the magnetic
9
to suspend the product from a
.
9
to prevent
can be turned
4