CARLO GAVAZZI Dupline G 3800 0036 Quick Start Manual

Dupline Data Logger
®
Types G 3800 0036, G 3800 1036

Product Description

Programmable channel
generator with built-in event
and time based logging
functions for digital, analog
and counter values. Log
Records can be sent to the
central Dupline-Online Web-
server via built-in GSM
modem (optional) or the
Internet. Users can access
real-time and historical
logged data via the Internet
as alarm buffers, trend
curves, bargraphs or as
comma separated files. The
Data Logger also contains
Intelligent Functions for light
and roller blind control,

Input/Output Specifications

Serial Port
COM 1
COM 2
Data format
COM 1, COM 2
Pin assignment
GND
Dielectric voltage
Com.port - Dupline ®
Protocol
RS 485 Termination
Fs-B
Fs-A
+ (B)
GND
Protocol
®
Dupline Output
Output voltage
Current
Short-circuit protection
Specifications are subject to change without notice (24.05.04)
Dupline ® is a registered trademark. A product of the CARLO GAVAZZI Group
alarm monitoring and analog
set-point control. In addition
to that, there is realtime,
timer and logic functions.
Programming is easily per-
formed through Windows-
based configuration
ware. Up to 32 Data Log-
gers can be networked as
slaves in a RS485 network
using the Modbus protocol.
The unit has 4 digital inputs
and 4 digital
onboard, and it is possible
to create links to other
Dupline networks via external
Radio Modem.
RS 232
115 kBaud
9600 Baud, adjustable
8 bit
No parity, 1 stop bit
9-pole female SUB-D
TxD Pin 2
RxD Pin 3
Pin 5
≥ 2 kVAC (rms)
Modbus-RTU
Pin 27 When in use,
connect to pin 31
Pin 28 When in use,
connect to pin 30
Pin 29 When in use,
connect to pin 31
Pin 30
- (A) Pin 31
Pin 32
*)
V+ Pin 33
Modbus-RTU
®
Dupline carrier
8.2 V
< 130 mA
Yes
• Programmable channel generator with optional built-in GSM
Modem
• Event and time based data logging functions for digital, analog
and counter values
• Log Records are sent to the central Dupline-Online Webserver
via GSM Modem or the Internet
• User access to real-time and historical Dupline-Online data via
the Internet
• Export of files with logged data via the internet
• Real-time, timer and logic functions
• Analog set-point control and monitoring
• Light and Rollerblind control functions
• Alarm Monitoring
• Option for Radio controlled clock for high real time accuracy
• User-friendly configuration via Windows 98/2000/NT/XP
Software
• 2 x RS232 ports for configuration and Dupline data read/write
• 1 x RS485 port for networking of up to 32 Data Loggers
• Modbus-RTU protocol
• Built-in software driver for external radio modem
• 4 digital inputs / 4 digital outputs on-board
• H8-housing for DIN-rail mounting (EN50022)
• AC or DC power supply

Ordering Key

Type: Dupline ®
H8-housing
GSM phone
soft-
Data Logger
Supply

Type Selection

outputs
Supply
115/230 VAC
10-30 VDC
Sequence time
32 channels / 128 channels
Digital outputs
Function
Output voltage V
Output current
Output voltage drop
Off-state leakage current
Short-circuit protection
Built-in protective diodes
Dielectric voltage
Output - Dupline
Output - Input
Inductive loads
Inputs
Digital
Voltage
Current
Dielectric voltage
Input - Dupline
GSM Modem
Siemens cellular engine
Dual Band
Output power
Antenna connector
*)
V+ and GND may be used as supply for digital I/O's, if RS 485 is not used.
Du line
Fieldbus
G 3800 1036 230
Ordering no. Ordering no.
w. GSM telephone
G 3800 0036 230 G 3800 1036 230
G 3800 0036 800 G 3800 1036 800
38.6 ms / 132.3 ms
4 PNP transistors
Programmable
≤ 35 VDC
DD
≤ 100 mA
≤ 2 V
≤ 100 µA
None
None
≥ 4 kVAC (rms)
®
200 V
External noise suppression
required
6 - 30 VDC
ON > 5.5 V; OFF < 1.5 V
≤ 6 mA
≥ 4 kVAC
®
TC35
EGSM900 and GSM1800
Class 4 (2 W) EGSM900
Class 1 (1 W) GSM1800
FME
®
Installationbus
1