Related Manuals for GCAN GC-2204
Summary of Contents for GCAN GC-2204
- Page 1 GC-2204 4-channel relay output module User manual DocumentVersionV3.11（2020/10/27）...
- Page 2 Guangcheng Technology GC-2204 user manual Revision History Version Date Reason V1.00 2015/09/16 Create V2.01 2015/12/20 Modify device parameters V3.01 2017/10/22 Add parameters V3.10 2018/05/24 Adjust document structure Modify product picture V3.11 2020/10/27...
-
Page 3: Table Of Contents
2. Installation and use....................5 2.1 Module fixing....................5 2.2 Wiring method....................5 2.3 System status indicator...................7 2.4 Combined with GCAN-PLC-400/510series...........7 2.5 Combined with GCAN- 8000series............... 8 3. Technical Specifications..................9 4. Disclaimer......................10 5. Module selection table................... 11 Sales and service......................13... -
Page 4: Introduction
GC-2204 user manual 1. Introduction 1.1 Overview The GC-2204 IO module has integrated 4 relay output channels, which can control the switching on and off of the relay according to instructions sent by the GCAN-PLC-400/510, GCAN-IO-8000/8100 series controllers. 1.2 Properties at a glance 4 relay output channels ●... -
Page 5: Installation And Use
Figure 2.1 Installation of GC-2204 module First the user need to install the GCAN-PLC on the guide rail and plug the GC-2204 along GCAN-PLC's right side until the lock is stuck. When remove the GC-2204, the user need to release the self-locking mechanism by pulling out the orange label. - Page 6 Guangcheng Technology GC-2204 user manual Figure 2.2 Wiring method of GC-2204 module Figure 2.3 GC-2204 module terminal definition...
-
Page 7: System Status Indicator
Table 2.2. When the indicator light is on, the status of the GC-2204 module is shown in Table 2.3 Indicator... -
Page 8: Combined With Gcan- 8000Series
ID is 0x201, the data length (DLC) is 1, and the frame data is0x08 note that if only one gc-2204 module is used, only the first byte in the frame data is effective. The following tables 2.4... -
Page 9: Technical Specifications
Electrical isolation 500 V (GC-bus/Signal voltage) Bit width in the Output 1 byte process image Installation position In sequential order Power supply Powered by GCAN-PLC, current consumption 180mA Environmental testing Operating -40℃~+85℃ temperature Permissible relative 95%RH，no condensation humidity EN 55024:2011-09... -
Page 10: Disclaimer
Guangcheng Technology GC-2204 user manual 4. Disclaimer Thank you for purchasing GCAN's GCAN series of hardware and software products. GCAN is a registered trademark of Shenyang Guangcheng Technology Co., Ltd. This product and manual are copyrighted by Guangcheng Technology. Without permission, it is not allowed to reproduce in any form. -
Page 11: Module Selection Table
Guangcheng Technology GC-2204 user manual 5. Module selection table GCAN-PLC-400 series products consist of a programmable main control module, several GC series IO modules and a terminal resistance module. GC series IO modules currently include five categories: digital input, digital output, analog input, analog output, and communication extension. - Page 12 Guangcheng Technology GC-2204 user manual GC-3844/3854/3 K type / S type / T type Thermocouple 4-channel thermocouple GC-4602 Voltage output, 16 bits -5V~+5V 2-channel GC-4622 Voltage output, 16 bits -10V~+10V 2-channel GC-4642 Current output, 16 bits 0-20mA 2-channel Analog GC-4652...
-
Page 13: Sales And Service
Guangcheng Technology GC-2204 user manual Sales and service Shenyang Guangcheng Technology Co., Ltd. Address: No.135-21, Changqing Street, Hunnan, Shenyang, Liaoning, China. E-mail: sygckj@gmail.com Tel/ Whatsapp: +86 13644001762 Skype：live:sygckj WeChat : gckj777 Website: www1.gcanbox.com...