Page 2
CONTENTS OVERVIEW 1—Cantilever Shelving Upright ......(Qty 2) Part numbers and height specifications: CSU-3212: 85.25” FULL HEIGHT SUPPORT CSU-3213: 72.25” FULL HEIGHT SUPPORT CSU-3216: 79.25” FULL HEIGHT SUPPORT CSU-3217: 85.25” FULL HEIGHT SUPPORT * Check your vehicle layout configuration and OEM for correct product.
Page 3
SHELVING ASSEMBLY SEQUENCE Install a Retain Ring on one side of each Hinge Pin (4 total per Upright). For shelving requiring three supports: Remove the upper and lower latches from the middle support as shown. For the remainder of the manual unless otherwise noted, the instructions will apply to all supports.
Page 4
Install Hinge Pin and Attach to vehicle wall as Retain Ring as shown. shown below. Repeat Steps 3 and 4 to install the lower Shelf. The Shelving Lock Upright feet are in engaged when customizable for drilling shelving is open, to locations and positioning.
This manual is also suitable for:
Prime design csu-3212Prime design csu-3213Prime design csu-3216Prime design csu-3217