Summary of Contents for Nexvoo AIMIC-M4
- Page 1 NEXVOO Conference Microphone Speaker User Manual (Model: AIMIC-M4) Please read and keep this instruction carefully before using the product...
-
Page 2: Product Instruction
Product Instruction NEXVOO Conference Microphone Speaker is a smart conference microphone speaker designed for office people, pickup, amplification, recording and subtitles. It can realize 360°sound pickup, intelligent noise reduction, recording and transfer writing and other functions. It solves the pain points of meetings, such as inaudible remote call, noisy environ- ment, and difficult to organize meeting minutes, so that users can enjoy a clear, stable and smooth remote call experience anytime and anywhere. - Page 3 Product Instruction List of accessories AIMIC-M4 USB Cable User Manual...
-
Page 4: Volume Indicator
Product Instruction Bottons and lights instruction Short press to connect / hang up the operator Always light Volume indicator The volume is the largest The volume is minimum Power indicator (short press the power button) Power level > 80% Power level ≤ 20% Short press to reduce the volume Short press to increase the volume Short press to switch the... -
Page 5: Indicator Status
Product Instruction Long press for 3 seconds to turn on or off Indicator status Red breathing light: Power level is less than 10% White breathing light: In the boot charging White always light: Boot charge full or shutdown charging ＊When the indicator is off, the charge is full. -
Page 6: Bluetooth Connection
Instructions for use 1. Connection The initial Bluetooth name of the device is "AIMIC-M4 * * * *" (that is, the last four serial at the bottom of the product). ＊Bluetooth connection (1) Mobile Bluetooth connection After the device is turned on, long press the (Bluetooth icon) Bluetooth button for 2 seconds. -
Page 7: Charging Instructions
Instructions for use * USB connection After the device is turned on, connect the device to the computer via USB cable. After hearing the prompt sound, the connection is successful. NOTE: The current version does not support OTG cable directly connected mobile phone. -
Page 8: Basic Parameters
Basic parameters Product name Conference microphone speaker Model AIMIC-M4 Size 112.5mm*112.5mm*35.4mm Bluetooth Bluetooth v5.1 Pickup radius Microphone Four omnidirectional simulated MEMS Speaker Battery capacity 2000mAh Charge 2A Type-C interface... - Page 9 Description Handling advice 1. Verify that the phone supports Bluetooth sound synchronization. Some Android / The volume is not Hongmeng phones do not support volume synchronized when the synchronization. phone is connected 2. Check whether the mobile phone is turned with Bluetooth on for volume synchronization.
- Page 10 Description Handling advice 1. Check that the microphone and speakers There is no sound when of the call software are properly connected to the device connected to the device. the ZOOM /Teams etc 2. Check whether the computer audio drive is APP on computer via normal.
Need help?
Do you have a question about the AIMIC-M4 and is the answer not in the manual?
Questions and answers