Outdoor Gigabit PoE Extender Series
INTRODUCTION
AP-GXC-0150: 1 PoE IN - to - 1 PoE OUT.
AP-GXC-0250: 1 PoE IN - to - 2 PoE OUT.
The AP-GXC-0150/0250 is outdoor Gigabit PoE extender capable of receiving 90W IEEE 802.3bt PoE power from PSE.
Multiple extenders can be cascaded to increase the cabling distance.
PACKAGE CONTENTS
•
1x Outdoor PoE Extender
IMPORTANT:
1. Install the device in a ventilated and dry place, that is free of electromagnetic source, vibration, moisture, and dust.
2. Make sure the ventilation openings on the extender are not blocked.
3. Use CAT.5e or 6 UTP/STP cables. Avoid using low-quality cables, which will seriously limit the cabling distance.
CONNECTION
Following are the conditions for making the cabling:
2. Typical cameras stream size feature = 1080p@30fps - 6Mbps; 720p@30fps - 3Mbps.
Make sure the combined bandwidth consumption does not exceed the uplink bandwidth from the PoE switch.
Note: There are power losses due to cable resistance.
INSTALLATION
AP-GXC-0150
PoE OFF/ON Switch
PoE Input
Connect to
PoE Switch
Ground screw
* Make sure the
grouning resistance
LED DEFINITIONS
PWR
PoE
LAN
DIP SWITCH DEFINITIONS
Pin 1
Pin 2
(AP-GXC-0250 only)
*If the device that is going to be connected to this extender is not PoE PD, please turn off the PoE output function.*
Quick Installation Guide
•
1x Quick Installation Guide
56VDC PoE Output
Green ON
PoE IN port is connected to PSE.
OFF
No PoE IN connection.
Green or Amber ON
Power over ethernet cable status
OFF
Ethernet cable no Power
Green ON
Data link is detected.
Green Flashing
Data is being transmitted or received.
OFF
Link is not detected.
ON
Port 1 Turn on PoE output
OFF
Port 1 Turn off PoE output
ON
Port 2 Turn on PoE output
OFF
Port 2 Turn off PoE output
AP-GXC-0250
PoE OFF/ON Switch
PoE Input
Connect to
PoE Switch
Ground screw
* Make sure the
grouning resistance
Port 1 :
56VDC PoE Output
Port 2 :
56VDC PoE Output
Need help?
Do you have a question about the VIVOTEK AP-GXC-0150 and is the answer not in the manual?
Questions and answers