Error Codes; Errors While In Local; Errors While In Remote - HP 3314A Operating Manual

The 3314A constantly monitors several internal functions for out of tolerance
operation and checks every operator entry for procedural errors.

Errors While in Local

When an error is detected,
propriate bltts) of the Status Byte are unmasked, that bit is set
message is sent.

Errors While in Remote

n
will be displayed for 1/2 second if Display Errors has not been turned off
n
by DEO While" Exx" is displayed, all 3314A HP-IB activity is halted. If the ap-
n
•
propriate bitlsl of the Status Byte are unmasked, that bit is set
message is sene,
The HP-IB command
n
n
to talk after "QER
number.
If the appropriate bit of the Status Byte is unmasked, an Error Code will set that
bit and set SRQ (Service Request). The affected bits are:
bit #0, indicating an operator error or 3314A failure
bit # 1, used as a flag for certain operating conditions
bit #3, indicating an Output Overload condition

ERROR CODES

Exx" will be displayed for 1/2 second. If the ap-
n
n
QER queries errors.
ERxx" will be
is received,
n
54
(=
(=
The next time the 3314A is addressed
returned, where xx is the error
1) and the SRO
1) and the SRO
E