3.
Before connecting the unit to the mains, make sure it is not damaged mechanically. If you
notice any signs of damage you should contact your dealer immediately. Do not connect the
device to the mains.
4.
Do not use the device in high humidity conditions and at temperatures above 40° C
5.
To avoid damage please don't use organic solvents to clean the fixture shell.
6.
The device must be installed on stable structures
7.
It should be installed in a well-ventilated place, at a distance of 15cm or more from the walls.
Please check if the fan and ventilation holes are unobstructed.
3
PRODUCT INFORMATION
3.1
Specification
•
Power consumption: 30W
•
Power supply voltage: 100 - 240V
•
Voltage frequency: 50/60Hz
•
Number of diodes: 6
•
Diode power: 3W
•
Display: No display:
•
Features: Sound activated (only integrated MP3 music player)
•
Additional information: Wireless remote control, Strobe effect:
•
AC IN: integrated power cord
•
IP Rating: IP20
•
Housing made: ABS
•
Cooling: Active
•
Height [cm]: 17
•
Width [cm]: 17
•
Depth [cm]: 17
•
Weight [kg]: 1
4
INSTALLATION
After removing the packaging, check if the device was not damaged during transport. Before connecting to
the mains, make sure that the device is securely mounted. The manufacturer is not responsible for damage
caused by unstable mounting.
Ensure proper connection to the mains and proper grounding. Make sure that the electrical parameters are
consistent with device requirements. All activities, including connecting the device to the mains must be
performed by qualified personnel.
5
CONNECTIONS
The device is equipped with the following interfaces:
1.
Power in: integrated power cord
3
www.flash - butrym.pl