Advertisement
Quick Links
Technical Parameters:
•
Recommended Water Pressure: 30→70 PSI
•
Recommended Hot Water Temperature: 100 °F → 120 °F
•
Highest Hot Water Temperature: 170 °F
•
Maximum Hole Size: 1-3/8" (35 mm)
•
Maximum Thickness: 1-3/16" (30 mm)
Required Tools:
Please Note:
•
NOTE: As with all Randolph Morris products, it is recommended that a licensed plumber or contractor install this
item to maintain warranty.
•
The inlet pipe cannot be bent excessively. (Figure 1)
•
The inlet pipe cannot be twisted excessively. (Figure 2)
•
The maximum thickness of the mounting plate is 1-3/16" (30 mm). (Figure 3)
•
Left is hot, Right is cold. (Figure 4)
Parts List:
Single Post Installation Guide
Advertisement
Summary of Contents for Randolph Morris Kally RMWZ8302-S
- Page 1 Maximum Thickness: 1-3/16” (30 mm) Required Tools: Please Note: • NOTE: As with all Randolph Morris products, it is recommended that a licensed plumber or contractor install this item to maintain warranty. • The inlet pipe cannot be bent excessively. (Figure 1) •...
- Page 2 Installation Steps 2. Install the O Ring (7) to the bottom of the 1. Please flush the water pipe for at least 2 mins faucet (1). Insert the inlet hose (2) into the before installation to ensure that there are no main body of the faucet (1) according to the red impurities.
- Page 3 5. Press the gravity ball (5) marked “open” button to 6. Connect the inlet pipe (2) to the angle valve. open the gravity ball (5), lock it to the bottom of Open the angle valve and check for leaks on all the drawing tube (as shown).
Need help?
Do you have a question about the Kally RMWZ8302-S and is the answer not in the manual?
Questions and answers