Advertisement
Quick Links
Advertisement
Related Manuals for iBell IBL SG80-27
Summary of Contents for iBell IBL SG80-27
- Page 1 HVLP FLOOR BASED SPRAY GUN IBL SG80-27...
-
Page 3: Table Of Contents
TABLE OF CONTENTS 1. GENERAL POWER TOOL SAFETY WARNINGS __________ 2. SPRAY GUN SAFETY WARNINGS _______________________ 3. PRODUCT OVERVIEW _________________________________ 4. PRODUCT SPECIFICATIONS ___________________________ 5. PRODUCT FUNCTIONS AND ASSEMBLY________________ 6. GENERAL OPERATION ________________________________ 7. TROUBLESHOOTING __________________________________ IBL SG80-27... -
Page 4: General Power Tool Safety Warnings
Keep it away from heat, oil, sharp edges or moving parts. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. IBL SG80-27... - Page 5 When servicing a power tool, use only identical replacement parts. Follow instructions in the maintenance section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of shock or injury. IBL SG80-27...
- Page 6 Injuries and damage to property due to broken cutting attachments or the sudden impact of hidden objects during use. Danger of injury and property damage caused by other objects or due to natural reactions or calamities. IBL SG80-27...
-
Page 7: Spray Gun Safety Warnings
Before any work (such as transport, construction, conversion, cleaning or maintenance) and when the product is not being used, disconnect it from the power supply and empty the paint container. IBL SG80-27... -
Page 8: Product Overview
The product must be fully assembled before WARNING! operation! Follow the assembly instructions and use the pictures provided as a visual guide to easily assemble the product! Do not connect the product to power supply before it is completely assembled! IBL SG80-27... -
Page 9: Product Specifications
: 230V~50Hz Rated Input Power : 800W Paint Reservoir : 800 ml Max. Viscosity : 100 DIN/sec Max. Flow : 1000 ml/min Nozzle ø 1.8 mm | 2.6 mm Protection class : Class II Weight : 2.2 Kg IBL SG80-27... -
Page 10: Product Functions And Assembly
Always place the spray gun base assembly on a clean surface to avoid sucking in dust through the air filter. Connect the air hose (8) to both the base and the spray gun. Connect the spray gun to the mains supply. IBL SG80-27... - Page 11 For thicker materials, it is recommended that you start with the highest material flow setting and then gradually decrease the flow to suit your spraying needs. For thinner materials, start with a low material flow setting, and then gradually increase the flow to suit your spraying needs. IBL SG80-27...
- Page 12 For changing nozzles, Loosen and remove the union nut (2) and air cap (1) from the paint head. Remove the nozzle and replace with the desired size. Tighten the air cap onto the paint head to secure the nozzle. IBL SG80-27...
-
Page 13: General Operation
If you feel the material is going on too thin, increase the material flow and if the material is going on too thick, decrease the material flow even further or move the spray gun further away from the surface. IBL SG80-27... - Page 14 Keep the vents of the spray gun clean at all times. If possible, prevent foreign matter from entering the vents. Clean the paint tank and suction tube with a brush. IBL SG80-27...
-
Page 15: Troubleshooting
4.1 Container material 4.1 Refill the material. running out. 4. Spray jet pulsates 4.2 Change the filter. 4.2 Air filter clogged. All further inspection and repair work must be WARNING! performed by an authorised service centre or a qualified technician! IBL SG80-27... - Page 16 Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice. Do not dispose this product by normal household waste, but take it to a collection point and recycling of electrical and electronic equipment.