Download Print this page

JWA NAXOS 70626 Assembly Instructions Manual

Dual monitor arm

Download this manual

NAXOS DUAL MONITOR ARM

Need help?

Do you have a question about the NAXOS 70626 and is the answer not in the manual?

Page 1 NAXOS DUAL MONITOR ARM...
Page 3: Parts Included
TOOLS REQUIRED NOT INCLUDED PARTS INCLUDED (x2) M4x12 (x8) M4x30 (x8) 12X5.8X16 (x8) (x1) (x1) (x1) S=4mm S=5mm (x2) M5x6 (x6) (x2)
Page 4 Tighten clamp using clamp screw until mount is securely fastened to desk. Loosen clamp screw until enough space is left for the edge of the desk. S=4mm Adjust locating ring at proper height and screw up tight to hold the mount. S=4mm M5x6 Insert the arms to the steel...
Page 5 M4x12 M4x30 12X5.8X16...
Page 6 S=5mm NOTE: Increase the tension in "+" direction if the arm automatically sags, decrease the tension in "-" direction if the arm automatically rises. Use a hex wrench to adjust the height tension Insert cable covers in spring arm. of the gas spring arm, to keep different weight of monitors still at any position.
Page 7 Product Care for Easy to Clean Material Items To protect your furniture, we suggest the following: Avoid placing your furniture in direct sunlight. Do not place furniture directly under windows. Do not place sharp materials (knife, fork, etc.) directly onto your furniture as sharp material may scrape and damage the ﬁnish.