Page 2
Edison and LEGO compatibility LEGO bricks can be attached to the top and bottom of the Edison robot and LEGO pegs can be attached on the sides. There are three types of holes on the side of Edison: 2 x 8 studs...
Page 3
Program Lift controller Edison Drive the top Edison over the following barcodes. Use buttons that correspond well with lift up and lift down on the remote control, but don’t use the buttons that you want to drive the EdLift with. See suggested button arrangement below, although your remote control will likely be different.
Page 4
Program driving Edison The bottom driving Edison will control the movement of EdLift (forwards, backwards, spin left and spin right). Drive this Edison over the following barcodes. Use buttons that correspond well with the driving manoeuvres on the remote control, but don’t use the buttons that you want to control the bucket with.
Need help?
Do you have a question about the EdLift and is the answer not in the manual?
Questions and answers