Advertisement
EMPTYING THE REMOVABLE WATER TANK
1. Switch OFF the dehumidifier by pressing the
ON/OFF Button to OFF position (O).
2. Hold the top of the unit and gently slide out the
Water Tank.
3. Open the Drain Plug and pour out the collected
water.
4. Reinsert the Drain Plug and slide the Water Tank
back into the unit.
5. To continue dehumidifying, press the ON/OFF
Button to ON position (I).
NOTE: Keep the Water Tank empty when the dehu-
midifier is not in use.
CLEANING
■ Always unplug the unit from the power outlet before cleaning to avoid the
risk of electric shocks.
■ Wipe the outside of the mini dehumidifier with a soft, damp cloth. In
particular, wipe down the air vents to remove any dust or particles. A
vacuum with a brush attachment can be used if available. Do not use strong
chemicals, oil-based products, or detergents, as this will damage the surface
of the unit.
■ To prevent any mold or mildew build-up to occur, the Water Tank should
be cleaned regularly.
■ To remove the build-up, use a funnel to pour a solution of 1/3 white vinegar
and 2/3 water into the Water Tank. Let it sit for at least 1 hour. Pour out the
solution. Rinse the Water Tank out with warm soapy water until the vinegar
smell dissipates.
CAUTION! Do not allow any water to come in contact with the internal parts.
11923 NE Sumner St, Portland, OR 97220
Telephone: (877) 899-8189
E-mail: support@pohlschmitt.com
Web: pohlschmitt.com
SPECIFICATIONS
Model No.: MD500
Size: 6,1 x 5,1 x 8,7 inch
Input: DC 9V 2.5A
Power: 21W
CUSTOMER
SATISFACTION
Volume: 17 fl. oz / 500ml
Coverage Area: <160 ft
MONEY
Working environment:
BACK
15°C(60°F) - 35°C(95°F)
M
Dehumidifier
Model No.: MD500
INSTRUCTION MANUAL
Please read Instruction Manual carefully before use and keep it for future reference.
Your satisfaction is guaranteed.
If you are not completely satisfied with our Dehumidifier and the
results it brings, we insist that you let us know. We'll help make the
Dehumidifier work for you, or we'll refund your money.
ini
Advertisement
Table of Contents
Summary of Contents for POHL+SCHMITT MD500
- Page 1 4. Reinsert the Drain Plug and slide the Water Tank back into the unit. 5. To continue dehumidifying, press the ON/OFF Model No.: MD500 Button to ON position (I). NOTE: Keep the Water Tank empty when the dehu- midifier is not in use.
- Page 2 PARTS This mini dehumidifier uses Peltier technology (no compressor) which makes it lightweight and quiet. Dry Air Outlet ON / OFF Button It is perfect for small rooms and poorly ventilated areas, such as wardrobes, cabinets, bathrooms, or storage rooms that are susceptible to damp odors and fungus.
Need help?
Do you have a question about the MD500 and is the answer not in the manual?
Questions and answers
Why won’t my dehumidifier turn on? The switch is in the on position without a light. Everything is plugged in and the basket is properly installed.
The POHL+SCHMITT MD500 dehumidifier may not turn on due to the following reasons:
1. Power Connection Issues – Ensure the DC Power Jack is inserted into the DC Power socket at the back of the dehumidifier and the AC connector is properly connected to a power outlet.
2. ON/OFF Button Position – Make sure the ON/OFF Button is switched to the ON position (I).
3. Voltage Compatibility – Verify that the voltage indicated on the rating plate matches the outlet voltage.
4. Extension Cord Usage – If using an extension cord, ensure it is rated for the appropriate power.
5. Stable Surface – Place the dehumidifier on a flat and stable surface for proper operation.
If the issue persists, further troubleshooting or contacting customer support may be necessary.
This answer is automatically generated