Download Print this page

STAMPLINE S-120 Operating Manual

Stamp machine

POLYMER SYSTEM

MAINTENANCE A

Table of Contents

Need help?

Do you have a question about the S-120 and is the answer not in the manual?

Page 1 POLYMER SYSTEM POLYMER SYSTEM MAINTENANCE A MAINTENANCE A...
Page 2 Your stamp designs come to life in the easiest way by STAMPLINE S-120, by placing polymer stamp materials on the exposure area of the machine which is controlled by a digital control panel.
Page 3 These are all the steps necessary to make the machine ready to use. b- Safety Instructions STAMPLINE S-120 polymer system stamp machines are designed and manufactured according to the CE regulations in order to provide your personal safety. Please follow the basic rules listed below for your safety.
Page 4 4- STAMP MAKING PROCESS with STAMPLINE S-120 1. Press the POWER button to turn ON and open the cover of the exposure area. “ ” 2. Lift up the upper glass and place the negative film on the lower glass in reading direction.
Page 5 - The machine has 2x16 LCD screen and control panel with membrane buttons.Using single button whole system can be operated and controlled in one screen. - Stampline S-120 polymer system stamp machine has 20x30 cm processing area. The case made of laser-cut chrome guarantees non-corrosion.