Advertisement
MAGIC SERIES
PROGRAMMABLE RGBW LED STRING LIGHTS
BUILT-IN MODES:
COLOR
Edit name
Adjust ALL lights
Set number of lights
(maximum 45)
Adjust color 1
Adjust color 2
ON/OFF
Adjust brightness
(1% - 100%)
RGBW mode
SCENES
There are 8 scenes pre-
Create your own endlessly
programmed in the app
customizable scenes.
with room for 24 total.
TROUBLESHOOTING:
Can't connect to your WiFi network?
Make sure you entered the correct WiFi password during the
WiFi set-up. Check your internet connection for issues. Make
sure you are in range of the WiFi router. If your WiFi signal is
not stable, reset your router and try again.
Set-up not working properly?
1.
Close all apps that are running in the background on your
device and then re-open the Smart Life app.
2.
Uninstall and re-install the app and repeat the set-up process.
Copyright © U Technology Corporation | All rights reserved | Contact us: customersuccess@utechnology.ca | (403) 800-3044 | utechnology.ca
- Installation Guide
|
PART #: UT-M48-12V-RGBW-IP65 / UT-M96-12V-RGBW-IP65
WHITE
Edit name
Adjust ALL lights
Set number of lights
(maximum 45)
Adjust color temp. 1
Adjust color temp. 2
ON/OFF
Adjust brightness
(1% - 100%)
White light mode
MUSIC
String lights will sync to
music playing from your
device using it's microphone.
Adjust the colors of
specified individual lights for
complete DIY scene design.
PLAN
Create your own custom
plans or schedules with
room for up to 30.
Lights not responding to the app?
1.
Check to make sure the string lights have not been turned OFF. If
they have, turn them ON and wait until they re-connect automatically.
2.
Check for issues with your internet connection. Reset WiFi router
if necessary and wait until they re-connect automatically.
How many colors are there to choose from?
The Magic Series string lights use RGB and White LEDs allowing
you to choose from millions of colors per light.
DIY
Adjust
specific
Power
lights
specific
lights
Turn the specified lights
ON or OFF to suit different
occasions or to save energy.
GROUP
Group paired devices by
selecting 'Create Group' and
choosing devices from the list.
Page 6
Advertisement
