Thermostat Installation; General Information; What's In The Box; Tools And Documents Required - EDST quext iot Installation Manual

Thermostat Installation

General Information

This guide is for Quext technicians who install Quext Smart Thermostats into resident units. Read these instructions
carefully. If you need help at any time during the installation, escalate to Quext.

What's in the Box

There are 4 Quext Smart thermostat sets to a box. Each box has 4 of each of the following:
Quext Mounting Plates
Thermostats (x4)

Tools and Documents Required

Pencil Level Flathead
Screwdriver

Thermostat overview

The thermostat dial lets you adjust the current temperature setting and access menus of additional features.
The LED screen displays temperature set points, override durations, menus, and indicators.
Item Description
A Network connection
B Infrared sensor
C Temperature set point
D Thermostat mode
E Fan mode
F Control method
G Dial
H Current room temperature
See next page for full list of indicators
Quext Smart Thermostat and Lock
AA Batteries
(x4) (x8)
#2 Phillips Smartphone Volt Meter Temperature
Screwdriver
Screws Drywall
(x4) Anchors (x8)
Gun
4
Community IoT Resident
Installation Plan User Manual
Installation Guide