YouLumi YL-IRP-005 Instructional Manual

RED LIGHT THERAPY
Instructional Manual
RED-LIGHT-THERAPY FOR HUMAN
Thank you for purchasing our red light therapy, we hope you can get benefits from our device .

SAY HELLO TO YOUR RED LIGHT

Before starting your first session, please make sure to read this manual as it may explain important operating
procedures. The red light devices use red 660nm and Infrared 850nm leds which is chosen to give the ideal
wavelengths found in the scientific research of the last three decades .
660nm of red light. This light can be seen by the eyes and targets skin cells.
850nm of near infrared light. This light cannot be seen by the eyes and targets deep tissue.

INDICATIONS FOR USE

Red Lights are general wellness devices and are not intended to cure or diagnose any medical conditions.
Use of this device is designed to help promote overall health and wellness by supporting cellular function.
Red Lights should only be operated based on the user guidelines, as outlined in this user manual.

FIRST TIME USERS

For first time users, we recommend starting out with 2-3 minute treatments per area, and slowly working up
to a 20-minute session over the course of 2-3 weeks as your body acclimates to the therapy.

STANDARD USE

We Recommend 20-minute treatments at 1-6 inches from your device. Additional 20- minute sessions for
specific areas may be beneficial but beyond a certain point, the scientific evidence points to diminishing returns.
More is not always better.
For this reason, we recommend you allow at least 6 hours between treatments of the same area. We recommend
no more than 30 minutes in any one session. We recommend using the device 2-14 times per week.
-1-

PROTECTIVE EYEWEAR

When treating, do not stare directly into the light emitting diodes (LEDs).
We recommend wearing protective goggles (included) when using the NIR driectly into the face.

SPECIFICATION

Product Name YL-IRP-005
Input Voltage
D 12 C 3A
(adaptor)
Bean Angle
30° or customized
Irradiance >105 mW/cm² @3inch
Net Weight 0.53kg

THIS PACKAGE INCLUDES

1* Red light device 1* Adapter
●
1* controller 1* User Manual
●

TIME CONTROLLER EXPLANATION

LCD Screen
Time Setting
Increase
Decrease Brightness
+ -
Brightness
Power Button :on/off
DC Charging : input voltage AC100-240V, through the adapter, the voltage
is converted to DC 12V

USER INSTRUCTION

1) Put the device in the appropriate position
2) Plug the adapter into the AC socket
3) Press the power button of controller, and press the power button of device, then the device is on
Actual Power 36W
24pcs 3535
LED QTY
Spectrum
850:660 1:1 or customize
200*120*25mm
Dimensions(mm)
7.87"x4.72"x0.98"
Lifespan
50,000
1* eye protection

OPERATION GUIDE

Power Switch of Device
Port
Socket
-2-
+ -
Controller
Adaptor