MobiSolar 60W-ETFE-B User Manual

User Guide
MobiSolar® 60W-ETFE-B Foldable Solar Panel
MobiSolar® 100W-ETFE-B Foldable Solar Panel
1. First use of the Product

The area of the solar cells on the face of the solar panel is
covered with transparent film to protect the panel during
transportation. This film must be removed for the panel to
function properly.

To remove the film, open the solar panel and place it on a flat
surface with the face of the panel facing up. Gently and slowly
peal off the film. Do NOT use any sharp objects or tools to
remove the protective film as this may damage the panel.
2. Operation

Open the panel and position it to face the sun, so that the
sunrays hit the panel surface perpendicularly. Reposition the
panel as the sun moves to maximize performance.

The panel works best on a clear day with abundant sunshine.
Clouds or shade will impair panel performance.

Avoid horizontal shading on the panel from nearby objects. If
unavoidable, vertical shading on the panel reduces
performance much less than horizontal shading.

The panel does not have a battery and does not store energy.
When in operation, connect the panel to a device to charge it
(phone, laptop, etc.) or a portable power station.

When charging portable power stations, solar generators and
other energy storage devices from the DC output connectors,
ensure that the devices are compatible with the maximum
voltage and current generated by the panel.

When charging batteries (including different types of lead-
acid and lithium batteries) with the DC output connectors,
always connect the appropriate charge controller between
the panel and the battery.
3. Performance

Improved module efficiency with half-cut cell technology.
 Proprietary cell sorting system ensures the best electric cell
match.
 Unique cell connection method provides better performance
than traditional busbar connections.

Optimized performance under low light conditions.

Comprehensive module power testing.
V3.0
4. Technical Specifications
Model
Peak Power
Cell Type
Cell Efficiency
Max Power Current (Impp)
Max Power Voltage (Vmpp)
Open Circuit Voltage (Voc)
Short Circuit Current (Isc)
Max System Voltage
Output Tolerance
DC Output – 2*
DC Output – 1*
USB 1  USB Port-QC3.0
USB 2  USB Port-A
USB Type-C  USB-C PD3.0
IP Rating
Working Temp.
Panel Surface
Dimensions (unfolded)
Dimensions (folded)
Weight
*When used simultaneously, DC outputs 1 and 2 operate at reduced
power output. When used individually, they provide full rated power
output.
5. Safety Tips

Electrical shock hazard – do not touch terminals. The solar
panel will always remain energized as long as it is exposed to
a source of light. It should be treated as live electrical
equipment. Exercise caution when using metallic tools,
conductors, or jewelry to prevent short circuits and sparks.

Do not bend the panel or put weight on it.

Do not use the panel if it is damaged or functioning
abnormally.

Do not leave the panel outdoors when it is raining.

Do not immerse or clean the panel with water, it is not
waterproof.

Clean the panel with a wet cloth.
 Do not disassemble or attempt to repair the panel.

Do not use or store the panel near sources of heat such as fire
or heater.
100W-ETFE-B 60W-ETFE-B
100W 60W
Monocrystaline
21.4%
5.35A 2.87A
18.70V 20.90V
22.10V 24.70V
5.86A 3.38A
100V
±3%
5.5*2.1mm/5A (Max.)
XT60/30A (Max.)
5-20V/3A
5V2A
5-20V/3A; 20V/5A (Max.)
IPX4
-40°C +80°C
ETFE
1210*565*30mm 880*530*30mm
600*565*50mm 440*530*50mm
4.5kg 2.6kg
MobiSolar Corporation
www.mobisolar.ca