Advertisement
Quick Links
Advertisement
Summary of Contents for Q-DIS W213-CT
- Page 1 Installation Manual Interface for Mercedes Benz MBUX...
- Page 2 Compatibility: Mercedes Benz MBUX Components: Interface Main *1 Interface Input / Output specification: Input: LVDS IN (Car System) *1 CVBS(Front Camera) *1 CVBS(Rear Camera) *1 Output: LVDS OUT (Car System) *1 Power Spec: Input Power: 8VDC ~ 18VDC Consumption: 5WATT Switch input mode: External video sources skip function: Able to control input videos on and off via Dip switches...
- Page 3 Main Board QCPASS 10Pin Wires Power cable (New) Remote Control Power Cable Dual Fakra Cable IR Cable REMOTE0001 HLCDCA0058 HIRCAB0002...
- Page 4 * ON : DOWN / OFF : UP Please make sure to disconnect the power cable of the interface and reconnect the power cable again to apply the dip switch changes. FUNCTION Dip S/W SELECT OFF : After Market Front Camera Fcam ON : OEM Front Camera OFF : OEM Rear Camera...
- Page 5 FUNCTION POWER & PIP MENU Activating OSD menu Making a selection, changing image display ▲ Moving upward ▼ Moving downward Moving leftward ◀ (If you press this button 2 seconds long, you can access the factory mode) Moving rightward ▶ (If you press this button 2 seconds long, you can reset all the data about user environment)
- Page 6 Menu of FACTORY PARK PAS TYPE UTIL1 PAS SETUP INFO REAR TYPE AUTO FCAM RCAM TIME RADAR ENABLE MENU to Return SEL to Select/Save PARK PAS TYPE: Select parking line type. - NOT USED: Do not use parking line - PAS ON: Use Flexible Parking Lines - PAS OFF: Use fixed parking line PAS SETUP: You can move the position of parking line.
- Page 7 Menu of FACTORY UTIL1 PARK AVOUT SELECT UTIL1 AUTO FCAM TIME FACTORY RESET: Factory mode reset INFO FCAM FUNC NAVI MODEL HDMI MODEL FACTORY RESET MENU to Return SEL to Select/Save Menu of FACTORY System version information PARK SYSTEM VERSION UTIL1 INFO (MAIN -210525)
- Page 8 * Press Return button on steering wheel to activate or deactivate PIP Function 7inch monitor Small PIP screen 10.1inch monitor Split screen to show OEM PDC *Pressing PIP Button on Remote control has the same function.
- Page 9 * Please refer next page for LVDS in/out connection Rear camera input *1 Front camera input *1...
- Page 10 Find the red color double Fakra connector behind the command MBUX HU OEM Angle type double Fakra connector OEM Cable LVDS OUT LVDS IN OEM HU...
- Page 12 Q. I cannot change mode A. Check connection of Ground cable and IR Cable. Check LED lamp is on, if not check connection of POWER cable. Q. All I got on the screen is black. A. Check second LED lamp of the interface is on, if not, check Video sources connected are working well.
- Page 13 RM #404 4TH FLOOR, B-DONG, WOORIMLIONSVALLY, 371-28, GASAN-DONG, GEUMCHEON-GU, SEOUL, KOREA. TEL : 82-2-868-3627~9 | FAX : 82-2-2026-5987...