Luminoso LOC Series Installation Instruction

Led street light

Advertisement

PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION

IMPORTANT INSTALLATION INFORMATION

1. Before commencing installation or maintenance, ensure electricity is
switched off at the mains. Installation or maintenance should be carried
out by a qualified electrician.
2. The luminaire must not, under any circumstances, be installed in
direct contact with flammable materials, and luminaires must not be
covered with any flammable materials.
3. Mounting height range of 6 to 15 meters, this model is suitable
outdoor lighting.
Ensure there is adequate free air circulation of at least 50cm around the
luminaire. It is the installer's responsibility to consider fire risk and take
appropriate precautions.
Mode l No.
No. of LEDS
LOC-30W
18
LOC-60W
36
54
LOC-90W
LOC-120W
72
LOC-150W
90
LOC-180W
108
LOC-210W
126
144
LOC-240W
162
LOC-270W
180
LOC-300W
Inpu t Voltage: 120-277V ~ 50/60H z
The ingress protection of the fixture is IP67 if the mains supply cable's specification is H07RN-F 3*1.5m
Mode l No.
No. of LEDS
LOC-80
-HV
36
LOC-120
-HV
54
LOC-160
-HV
72
-HV
LOC-200
90
LOC-240
-HV
108
LOC-280
-HV
126
-HV
LOC-320
144
Inpu t Voltage: 347-480V ~ 50/60H z
The ingress protection of the fixture is IP67 if the mains supply cable's specification is H07RN-F 3*1.5m
Luminosoled.com
System Wattage
Dimensions (L x W x H)
30W
463mm(18.2")x345mm(13.6")x116mm(4.6" )
523mm(20.6")x345mm(13.6")x116mm(4.6")
60W
583mm(22.9")x345mm(13.6")x116mm(4.6")
90W
643mm(25.3")x345mm(13.6")x116mm(4.6")
120 W
703mm(27.7")x345mm(13.6")x116mm(4.6")
150 W
763mm(30.1")x345mm(13.6")x116mm(4.6")
180 W
210 W
823mm(32.4")x345mm(13.6")x116mm(4.6")
240 W
883mm(34.8")x345mm(13.6")x116mm(4.6")
270 W
943mm(37.1")x345mm(13.6")x116mm(4.6")
300 W
1003mm(39.5")x345mm(13.6")x116mm(4.6" )
System Wattage
Dimensions (L x W x H)
80W
523mm(20.6")x345mm(13.6")x116mm(4.6")
120 W
583mm(22.9")x345mm(13.6")x116mm(4.6")
160 W
643mm(25.3")x345mm(13.6")x116mm(4.6")
200 W
703mm(27.7")x345mm(13.6")x116mm(4.6")
763mm(30.1")x345mm(13.6")x116mm(4.6")
240 W
823mm(32.4")x345mm(13.6")x116mm(4.6")
280 W
883mm(32.4")x345mm(13.6")x116mm(4.6")
320 W
LOC Series
LED Street Light
INSTALLATION INSTRUCTION
L
W
Weight
Workin g Envir onmen t
EPA*
6.46kg(14.2lbs.)
0.46 2
7.09kg(15.6lbs.)
0.50 3
8.22kg(18.1lbs.)
0.54 4
8.88kg(19.5lbs.)
0.58 5
9.47kg(20.8lbs.)
0.62 8
- 40℃-+50℃
10.83kg(23.8lbs.)
0.67 2
11.47kg(25.2lbs.)
0.71 5
12.49kg(27.5lbs.)
0.75 7
13.12kg(28.9lbs.)
0.80 1
13.88kg(30.5lbs.)
0.84 4
Weight
Workin g Envir onmen t
EPA*
7.09kg(15.6lbs.)
0.50 3
8.22kg(18.1lbs.)
0.54 4
8.88kg(19.5lbs.)
0.58 5
10.00kg(22.0lbs. )
0.62 8
-40℃-+50℃
10.83kg(23.8lbs. )
0.67 2
11.47kg(25.2lbs. )
0.71 5
12.49kg(27.5lbs. )
0.75 7
H
IP
IP67
IP
IP67
[1]

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LOC Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Luminoso LOC Series

  • Page 1 LOC Series LED Street Light INSTALLATION INSTRUCTION PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION IMPORTANT INSTALLATION INFORMATION 1. Before commencing installation or maintenance, ensure electricity is switched off at the mains. Installation or maintenance should be carried out by a qualified electrician.
  • Page 2 LEAVE A COPY FOR THE USER / MAINTENANCE ENGINEER FOR FUTURE REFERENCE Installation Instruction & Installation Steps Rotatable tenon Locking nuts Locking bolts Pole Screws to adjust and lock rotatable tenon STEP 4: STEP 1: Run main power supply cord into led driver compartment via cable gland, and use open spanner or Loosen nuts from pole locking bolts, then slide fixture on to pole through opening (tenon) on the similar tool to lock the gland to main power supply cord tightly.

This manual is also suitable for:

Loc-30wLoc-60wLoc-90wLoc-1200wLoc-150wLoc-180w ... Show all

Table of Contents