Pinegreen Lighting CL-TWL20K Assembly Instructions

Assembly INSTRUCTIONS: SKU# 27100098, ITEM# CL-TWL20K | 20,000LM DUAL HEAD LED WORK LIGHT WITH TRIPOD
If you have questions or missing parts, please contact our customer care at 1-888-745-4837
WARNING:
You should always follow basic precautions.
Read, follow, and understand all instructions and warnings before beginning any
installation of this product. Failure to do so can result in electric shock, fire, or other
injuries, including death. Save this user manual for instructions and warnings for
possible future relocation and installation.
CAUTION:
- This product is designed for dry use and is not waterproof. Never submerge this
product in water.
- DO NOT use on radiant heated surfaces.
- DO NOT remove the lens protecting the LED.
- DO NOT open the product. It is NOT possible to change the LED lights or source.
- DO NOT use near a gas source.
- This product is not intended for use in possible explosive areas. It should never be
in an area of exposure to vapor elements.
- This product is not a toy and should stay out of children's hands.
- When using the unit outside and to reduce the risk of fire or electric shock, safety
precautions should always be followed.
- Always use GFCI protected circuits in wet or damp conditions.
- Keep all plugs and receptacles dry at all times.
- It is important to keep the unit at least 16 feet away from wet areas such as pools,
spas, or standing water.
- Always use an outdoor-rated extension cord with a 3-prong ground plug with this
product.
- Keep this product away from flammable materials such as drapes.
- NEVER move the unit by pulling the power cord.
- NEVER use the unit if there is damage or exposed bare wires. It is recommended to
inspect the cords and connectors for wear or damage.
- ALWAYS make sure the light is on a leveled surface. Failure to do so can cause the
unit to fall and break.
- ALWAYS plug the unit into a properly grounded circuit.
WARNING:
RISK OF ELECTRICAL SHOCK.
TO AVOID ELECTRICAL SHOCK, MAKE SURE TO TURN
OFF THE MAIN POWER SOURCE OR DISCONNECT POWER
DURING THE INSTALLATION OR SERVICE
OF THIS PRODUCT