Summary of Contents for JetStor SAS 724HS 10G Series
Page 1
JetStor subsystem JetStor SAS 724HS 10G Series Chassis Quick Installation Guide Version 1.2 (APR, 2011) Advanced Computer & Network Corp. http://www.acnc.com Quick Installation Guide# SAS 724HS 10G Series Advanced Computer & Network Corp. www.acnc.com Copyright 1993 – 2013 All Rights Reserved...
Page 2
This article provides a quick guide to install the JetStor Sas 724HS 10G chassis into a rack. Contents To install the subsystem into a rack with the kits, please follow this procedure. Prepare the rackmount kits and the screws.
Page 3
Figure 3 At the FRONT side, put the nuts in the appropriate place. And then use the screws to install the rackmount kits. Figure 4 (Front-Left) Figure 5 (Front-Right) Similarly, at the REAR side, put the nuts in the appropriate place. And then use the screws ...
Page 4
Figure 6 (Rear-Left) Figure 7 (Rear-Right) Put the subsystem onto the rails. Figure 8 (Side view) Caution The subsystem is very heavy. To avoid personal injury and damage to the subsystem, it’s recommended to install into the rack by two persons or more.
Page 5
Figure 9 (Front-Left) Figure 10 (Front-Right) Front view. Figure 11 (Front view) Done. Advanced Computer & Network Corp. www.acnc.com Copyright 1993 – 2013 All Rights Reserved...