Image Projection iPro 150E Instruction And User's Manual

Led outdoor gobo projector

Advertisement

Quick Links

iPro 150E/200E/300E LED
Outdoor Gobo Projector
Instruction/User Manual and Specifications

Package Contents

Projector, optical lens and cable with standard 110 Volt plug.

Description

iPro "E" LED projectors are rated IP-65 for outdoor use. To project
an image, a high resolution glass or metal gobo is required. To
order a gobo, e-mail the artwork of the desired image to
UseLight.com. Line-art or vector files are acceptable, as are pixel
files (e.g. .JPEG, .PNG, .TIFF, .PDF, etc.) 300 dpi or better.

Safety Information

For indoor or outdoor use.
Prevent direct eye exposure to the light source as it may lead
to injury or blindness.
This projector uses a heat sink for cooling, which can heat up
the projector. Please use caution when handling or touching
the unit during and after operation.
Only use power sources that comply with local electrical and
building codes and have proper grounding.

Gobo Specifications

Outer diameter (OD) - 66 mm
Inner or image diameter (ID) - 46 mm
Gobo thickness: Up to 3 mm
Info@
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iPro 150E and is the answer not in the manual?

Questions and answers

Summary of Contents for Image Projection iPro 150E

  • Page 1 150E/200E/300E LED Outdoor Gobo Projector Instruction/User Manual and Specifications Package Contents Projector, optical lens and cable with standard 110 Volt plug. Description iPro “E” LED projectors are rated IP-65 for outdoor use. To project an image, a high resolution glass or metal gobo is required. To...
  • Page 2 Projector Specifications Gobo Installation iPro-300E iPro-150E iPro-200E Model: and Exchange 110 to 277 V* 110 to 277 V* 110 to 277 V* Power Output: 150 W 200 W 300 W Lamp (LED) 50/60 Hz 50/60 Hz 50/60 Hz Rated Frequency: 30 - 40,000 Hrs 30 - 40,000 Hrs 30 - 40,000 Hrs...
  • Page 3 Adjusting the Image Focus Once the gobo is succesfully installed and the front plate cover is reattached, rotate the lens clockwise or counter-clockwise until the image is in focus. Once the image is in focus, turn the lock ring clockwise until the rubber gasket is slightly compressed.

This manual is also suitable for:

Ipro 200eIpro 300e

Table of Contents