Table of Contents
Advertisement
Quick Links
User's manual
Outdoor Enclosure 4 × 2.3 × 1.8 m
62841
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.
Advertisement
Table of Contents
Related Manuals for Fudajo 62841
Summary of Contents for Fudajo 62841
- Page 1 User’s manual Outdoor Enclosure 4 × 2.3 × 1.8 m 62841 Illustration similar, may vary depending on model Please read and follow the operating instructions and safety information prior to initial operation. Technical changes reserved! Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further...
- Page 2 To allow for a trouble-free complaint or return, it is important to contact our customer service team before returning your goods. Retourenabteilung WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler – Germany E-mail: service@wiltec.info Tel: +49 2403 55592–0 Fax: +49 2403 55592–15 © by WilTec Wildanger Technik GmbH Item 62841 Page 2 http://www.fudajo.com 06 2022-1...
- Page 3 Parts list Door Name Quantity Door hinge Fastener Hook Reinforcing bar M8×50 screw M10×50 screw Self-tapping screw (M5.5×19) Safety lock Wire mesh Roof Wire tie Rubber rope © by WilTec Wildanger Technik GmbH Item 62841 Page 3 http://www.fudajo.com 06 2022-1...
- Page 4 1765 2030 2030 – Tools (included): wrench, sockets, wire-strainer – Tools (also required): drill, pair of pliers – Assembly time: approx. 1 hour (with 2 persons assembling) © by WilTec Wildanger Technik GmbH Item 62841 Page 4 http://www.fudajo.com 06 2022-1...
- Page 5 Loosen the two frame fasteners to be able to align the elements accurately. Step 2: assembling the frame Note! The door is designed to be mounted to the left side of a corner. © by WilTec Wildanger Technik GmbH Item 62841 Page 5 http://www.fudajo.com 06 2022-1...
- Page 6 3. Using a cordless screwdriver, insert the self-tapping screws into the corresponding pilot holes of the tubes and tighten them. This will help to stabilise the enclosure additionally. Step 4: attaching the wire mesh © by WilTec Wildanger Technik GmbH Item 62841 Page 6 http://www.fudajo.com 06 2022-1...
- Page 7 2. Using the two fasteners and the M8×50 screws, vertically attach the tubes (4) to two opposite sides of the enclosure and fix the tubes (4) to the middle of these sides. © by WilTec Wildanger Technik GmbH Item 62841 Page 7 http://www.fudajo.com...
- Page 8 Important Note: Reproduction and any commercial use (of parts) of this operating manual, requires a written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 62841 Page 8 http://www.fudajo.com 06 2022-1...
Need help?
Do you have a question about the 62841 and is the answer not in the manual?
Questions and answers