TubeMUv2, is for sure the most malleable compressor in your tool drawer. And don't worry if you don't know if it will be optimal for this style or that. TubeMUv2 is an all- rounder.
UPWARD, is more oscillating. RATIO: Compression ratio, with a range of 1:1, 2:1, 3:1, 4:1, 5:1, 6:1, 7:1, 8:1, 9:1, 10:1, 30: 1. ATT: Attack adjustment from 0 to 100ms. REL: Release adjustment from 25 to 100ms. TubeMUv2 | User's Guide...
Thus, with very little input signal, we can generate a high compression, or on the contrary, adjust so that with a high input signal, we can reduce the compression level. TubeMUv2 | User's Guide...
Below the switch we have a lamp, which indicates, long before the area (Clip) in white, the beginning of the soft limiting process. The red color indicates that we are forcing its entry. OUTPUT: Its implementation is arranged "POST LIMITER" to be able to reduce or increase some dB. TubeMUv2 | User's Guide...
MAKEUP: Recovers signal losses caused by compression. It is positioned at the entrance of the final limiter, thus favoring the pressure adjustment at its entrance. POWER: Starting up and shutting down TubeMUv2. TubeMUv2 | User's Guide...
Best, locates 8 samples per period. Excellent, locates 4 samples per period. RESIZE: It gives us the possibility to adapt the size of TubeMUv2 to any screen. We can adjust in steps from “50, 75, 100, 125, 150, 175, 200% gives us the possibility to adapt the size to any screen.
Need help?
Do you have a question about the TubeMUv2 and is the answer not in the manual?
Questions and answers