Advertisement
高清晰语音通讯；
自动检测电信局来电制式 (FSK / DTMF) ；
38 组来电查询；
5 组去电查询；
来电 , 去电可设置为 VIP 功能 , 防删除电话号码功能；
5 位区域码来电过滤；
1 位出局码适应虚拟网；
32 位预拨号及改错；
16 位 LCD 拨号显示及电子台历显示功能；
15dB 接收喇叭，数码音量调节；
外置铃声和内置铃声选择功能 ；
开机背光灯指示功能；
提供 RJ-11 耳麦接口 ；
1.
设置键
2.
上翻键
3.
下翻键
4.
删除键
5.
铃声指示灯
6.
去电键
7.
收线键
8.
重拨键
9.
开 / 关机键
10.
数字键
11.
保留键
12.
暂停键
13.
耳机插座
14.
记忆3键
15.
铃声内外选择开关
16.
记忆2键
17.
记忆1键
22
21
20
19
18
17
16
15
14
13
12
11
Use the volume switch on the side of the base to adjust the speaker volume.
7.5 FLASH FUNCTION
Press the FLASH button to get special service such as 'Call Waiting' or "3-way
calling".
7.6 REDIAL FUNCTION
Press the ON button, then press the REDIAL button, the latest dialed number
will be dialed out.
7.7 RECEIVING CALLER ID INFORMATION
Note: You must make sure your Telephone Company offer caller ID service so that the
caller ID function can be activated.
When there is an incoming call, the LCD will display the number, area code, time
and date of the call. When receiving a telephone call, the telephone will detect the
FSK or DTMF format and display the calling number. If this is a FSK format caller
ID signal, the current date and time display will also be updated. If this is a newly
coming call, the "NEW" icon will be displayed. If the incoming call is a repeat
number, the "REP" icon will be displayed. If the incoming call is a private call, the
icon ---p--- will be displayed. If the incoming call is out of area, the icon ---o--- will
be displayed. If a wrong number comes in, the ---E--- will be displayed.
7.8 CALLING BACK A NUMBER FROM THE CALLER ID LIST
Under standby state, use UP and DOWN to select the desired number.
If the area code was set and the incoming call is 7 digits, press REDIAL once to
keep showing 7 digits, press REDIAL twice to show 10 digits with adding 3
digits area code, press REDIAL three times to show 11 digits with adding area
code and long distance code '1' as the first digit. Pick the handset to dial out the
displaying number.
If the incoming call is 10 digits, press REDIAL once to show 11 digits with
adding long distance code '1' as the first digit. Press REDIAL twice to show 10
digits and press REDIAL three times to show 7 digits to eliminate the area code.
Pick the handset to dial out the displaying number.
Under in-use state, use UP and DOWN to select the desired number. Press
1
REDIAL and the displaying number will be dialed out automatically after 2 seconds.
2
If the area code was set and the incoming call is 7 digits, press REDIAL once
3
to keep showing 7 digits, press REDIAL twice to show 10 digits with adding 3
4
digits area code, press "REDIAL" three times to show 11 digits with adding area
code and long distance code '1' as the first digit. Waiting for 2 seconds and the
5
displaying number will be dialed out automatically.
6
If the incoming call is 10 digits, press REDIAL once to show 11 digits with
7
adding long distance code '1' as the first digit. Press REDIAL twice to show
8
10 digits and press REDIAL three times to show to show 7 digits to eliminate
9
the area code. Waiting for 2 seconds and the displaying number will be dialed out
automatically.
10
7.9 REVIEWING THE CALLER ID LIST
Press UP or DOWN to review the outgoing calls (at most 16 calls)
7.10 DELETE FUNCTION
In set mode, press DELTET button is used to quit set.
When you use pre-dial function, press DEL button is used to correct the input
mistake.
When you check the incoming calls memories, press DELETE button is used to
delete the unwanted memory. If you press DELETE button and to not release for
more than 4 second, all memories will be deleted,
Advertisement
