Advertisement
Warning : Protect Board from electrostatic discharge. Ground yourself before
handling.
Thank you for purchasing the Titanic Horn sound board from Starling
Technologies™. Board features Steam Horn sound for this Historic Ship.
The use of the board is quite obvious, but here are some basic instructions
below.
1
www.starling-tech.com
Instruction Manual
Note: Kit shown with optional
Remote control.
The sound board arrives as seen at left.
A hole can be drilled through a custom
plastic housing, and the on/off switch can
be glued from behind protruding through
the hole.
You may use board and speaker as is,
or remove them from the sticky pad. Be
careful with the wires as they are very
thin and fragile.
Push-button activates horn.
Advertisement
Table of Contents
Summary of Contents for Starling Technologies S-RMST-1
- Page 1 www.starling-tech.com Instruction Manual Warning : Protect Board from electrostatic discharge. Ground yourself before handling. Thank you for purchasing the Titanic Horn sound board from Starling Technologies™. Board features Steam Horn sound for this Historic Ship. The use of the board is quite obvious, but here are some basic instructions below.
- Page 2 Some ideas for mounting. Because the board is battery powered, you will need to install it where you will have access to the batteries. 1) You may create a custom box from polystyrene sheet to house the unit and allow the speaker to mount to. Drill small holes where the speaker will mount to let the sound out.
- Page 3 This will place more tension on the batteries for better contact. All photos contained in this document are property of Starling technologies. This document may not be copied, sold or transfered without permission.
Need help?
Do you have a question about the S-RMST-1 and is the answer not in the manual?
Questions and answers