HANSONG
RGB LED
Dial switch
Bottom
3.3
Key Features and Performance
1. Bluetooth input source, requires Distance greater than 10m in open distance.
2.The pair bottom can set the bluetooth .
3.The RGB LED indicate different states .
4. Remote control. requires Distance greater than 10m in open distance.
3.4
Special connectors & modes.
Debug/Tuning connector
A 6 pin connector will be present on the PCBA to allow the connection to the MCU for Debug and
Tuning purpose.
Factory test mode
Set the dial switch as below picture.
4
System Structure
4.1
Digital-in
Optical input can support a rate of 192Khz . Don't support Dolby and DTS . only PCM 2.0.
4.2
Analog-in
Aux input max 1.25V rms input, standby mode by audio signal detector .
4.3
BT-in
ATS2819 moudle, Can support BT5.0 .
[Product Specification]
HANSONG
X1
X1
X1
[ 8 / 11]
汉桑(南京)科技有限公司
(
)
N ANJING
T ECHNOLOGY CO. , LTD.
See user Interface part
Choose different EQ
Pair bottom
[2019-12-06]