Summary of Contents for syncrotek Nox Audio CN400
- Page 1 ENGLISH CN400 CN550 CN700 Column Speaker OWNER’S MANUAL Version 1. Winter, 201 By syncrotek...
-
Page 2: Product Description
PRODUCT DESCRIPTION diagrams to familiarize yourself with the product. grade extruded aluminum and equipped with perforated grill. With the... - Page 3 IMPORTANT Please read this manual carefully and Save it for future reference. Follow all individuals handling it. Never use damp or spill liquid of any kind on the product and clean it only with a dry cloth. covers may expose you to dangerous voltage points or other risks. Refer all center.
-
Page 4: Product Diagrams
PRODUCT DIAGRAMS 106mm Front Drawing (without grill) 106mm 106mm 75mm 75mm CN700 CN550 CN400 75mm Side Drawing (without grill) CN400 CN550 CN700... -
Page 5: Speaker Connection
SPEAKER CONNECTION Keep the same polarity terminals wired together to ensure correct the overall performance of the system. Power Level Tapping Model CN400 CN550 CN700 White Green Black White Green Black... -
Page 6: Standard Installation
STANDARD INSTALLATION For hanging the colunm speaker, you can make the holes on the surface the speaker M6 Thread screws Washer 20mm Drill hole distance for the value of Drill hole distance Model CN400 CN550 20mm CN700 Angled plate... - Page 7 ANGULAR INSTALLATION Follow the procedure for the angled plate, you can adjust the angle of the dispersion of the Flat plate maximum angle and adjust to less can also do the same horizontal Angle adjustment Distance A Max. dispersin angle...
-
Page 8: Angle Adjustment
ANGLE ADJUSTMENT adjust angle dispersion horizontally according your requirement. The maximun angle is 50 degree each side. At last, please dispersion as per the method stated of the speaker 50 degree Max. - Page 9 tear. Improper handling, neglect or failure to operate the unit in compliance with the owner’s manual provided with the products. where it is used. personnel including the user will void this warranty. dealer.
-
Page 10: Technical Specifications
TECHNICAL SPECIFICATIONS SPECIFICATIONS CN400 CN550 CN700 Frequency response 170Hz - 15kHz Impedance 100V 92dB 93dB 91dB 30/15 40/20 20/10 Input terminals Full range driver type 6x2.5” 8x2.5” 4x2.5” Extruded Aluminum Body Hardware Coverage Angle 100º*75º 100º*65º 100º*55º Dimensions (H x W) 548x106mm 691x106mm 405x106mm... -
Page 11: Troubleshooting
TROUBLE SHOOTING Cause No Sound Disconnected, no Check power supply, set volume power, volume too speaker overloaded appropriate level Low sound Volume set too output low, shorted Noise Speaker Check the hardware if they are components not grounded, hardware loosen Noxaudio dealer. - Page 12 Nox Audio www.noxaudio.com Technical Department...
Need help?
Do you have a question about the Nox Audio CN400 and is the answer not in the manual?
Questions and answers