ATOMIC MASS GAMES MARVEL CRISIS PROTOCOL ELEKTRA Assembly Manual

CP 79

ELEKTRA ASSEMBLY GUIDE

Step 1

Step 4

READ THIS FIRST

Be sure to use a pair of sharp hobby clippers to remove the miniature components from the sprue. Carefully

clean the excess material and mold lines with a sharp hobby knife. Check the fit of each part before gluing. Use

a small amount of hobby plastic glue to assemble the components. Use caution with all products and follow all

manufacturer instructions. Adult supervision is recommended for children under the age of 16. Have fun!

JOIN THE COMMUNITY

Use #PaintingProtocol to share your miniature photos and be a part of the Marvel: Crisis Protocol community!

AtomicMassGames

Step 2

Step 5

Permission granted to print or photocopy for personal use.

Atomic Mass Games and logo are TM of Atomic Mass Games.

Atomic Mass Games, 1995 County Road B2 W, Roseville, MN, 55113, USA, 1-651-639-1905.

Actual components may vary from those shown.

AtomicMassGames

Step 3

Attach Base

Atomic_Mass_Transmissions

Table of Contents

Do you have a question about the MARVEL CRISIS PROTOCOL ELEKTRA and is the answer not in the manual?

Page 1 Permission granted to print or photocopy for personal use. Atomic Mass Games and logo are TM of Atomic Mass Games. Atomic Mass Games, 1995 County Road B2 W, Roseville, MN, 55113, USA, 1-651-639-1905. © MARVEL Actual components may vary from those shown.
Page 2 Permission granted to print or photocopy for personal use. Atomic Mass Games and logo are TM of Atomic Mass Games. Atomic Mass Games, 1995 County Road B2 W, Roseville, MN, 55113, USA, 1-651-639-1905. © MARVEL Actual components may vary from those shown.
Page 3 Permission granted to print or photocopy for personal use. Atomic Mass Games and logo are TM of Atomic Mass Games. Atomic Mass Games, 1995 County Road B2 W, Roseville, MN, 55113, USA, 1-651-639-1905. © MARVEL Actual components may vary from those shown.

Cp 79