Page 1
Attach the ML-300 to the cutting machine with four M4 screws (screws not included). 2. Plug in ML-300 with the Type-C to USB Male Cable, then connect cable to the USB adapter. 3. USB adapter plug in the outlet and turn on the ON/OFF switch.
Page 2
SPECIFICATIONS Dimension(L X W X H) 4.92”x2.13”x2.32” (12.5cm X 5.4cm X 5.9cm) Weight 250±5g / 8.81±0.17 oz. Wavelength 520 nm (Green) Width of laser line <3mm at 5M CL II CW mode Output power Operating temp range -20°C ~ 60°C / -4°F ~ 140°F >80 ゚...