Summary of Contents for PELIOS K7
- Page 3 Separate body for easy cleaning...
- Page 4 Install the battery as shown in the below picture. Install the brush by inserting it into the tube carefully.
- Page 5 Install the Metal Tube by inserting it into the vacuum's suction tube. Install accessories by inserting them into the vacuum's suction tube (as shown below).
- Page 6 You should regularly check that the nozzle cushions and the brush roller are clean in order to avoid scratching sensitive floors. Follow Steps 1 to 3 to assemble the unit, then start the device by pushing on the On/Off button. To clean tables, furniture, car seats, or narrow corners;...
- Page 8 HOW TO EMPTY / CLEAN 2. Remove a�ached accessories from the body by pressing the release bu�on. (as shown below)
- Page 9 3. Remove the dust cup by pressing the release bu�on. Clean the inside components with a small, fine brush or toothbrush. Make sure all parts are dry before reassembling them. CLEANING AND/OR REPLACING THE HEPA FILTER 3. Press the bu�on to open the front cover, then take out the HEPA filter to wash it under flowing water.
- Page 10 REINSTALL THE COMPONENTS A�er you've removed and cleaned different components of your vacuum cleaner, make sure each part is reinstalled exactly how it detaching was prior to disassembly. Incorrect instalment could cause device damage.
- Page 11 If the roller brush becomes blocked or jammed for any reason, the vacuum cleaner's suc�on will be limited. To clean the roller brush, turn off the vacuum cleaner, then carefully use a pair of scissors or a sharp knife to remove any items, such as thread or hair, that are entangled in the brush.
- Page 12 If a wheel is jammed by dirt or threads, you can remove the wheels by prying them loose with a screwdriver inserted into the wheel cavity. Remove the threads or any other objects that have become jammed. Once finished, you can reassemble the wheels pressing by pressing them �ghtly back onto the axles.