1.Introduction 2.Device Description MANUFACTURER: 1. Motor Housing DJM Direct.com 2. Locking Strap 3. Power Cord Unit 43 Churchill Way, 4. Suction Hose Lomeshaye Industrial Estate, 5. Hose Coupling Nelson, Lancashire BB9 6RT UK 6. Hose Adapters DEAR CUSTOMER 7. Hose Clamp We hope your new tool brings you much enjoyment 8.
Page 4
3. Unpacking Protect eyes, face, and head from objects that may be thrown from the unit. Always wear safety goggles or ●Open the packaging and remove the device carefully. safety glasses with side shields when operating. ●Remove the packaging material as well as the Wear appropriate hearing protection.
Do not use the cable for purposes for which it is not • Leave hands free to operate machine. Protect hands intended. Do not use the cable to pull the plug out of from possible injury the outlet. Protect the cable from heat, oil and sharp •...
6. Contents Supplied • Impossibility of stopping the machine in the best possible conditions The dust collector comes partially assembled and • Variations in the rotational speed of tools is shipped in carefully packed carton. After all • Failure of the power supply the parts have been removed from the carton, •...
7. Introduction 9. Maintenance and Repair • Pull out the mains plug for any adjustment or repair Your new Dust collector will more than satisfy tasks. your expectations. It has been manufactured • Repairs are to be carried out only by a qualified under stringent quality standards to meet superior electrician using original replacement parts or the user performance criteria.
Page 8
10. Assembly Place the motor housing with filter cartridge/bag on to the collection canister and lock in place with the locking strap. Push the suction inlet mouth out of the hole in the drum from inner side, a gasket seal should be positioned inside between the drum wall and the suction inlet.
11. Operation 12. Maintenance Before Starting DANGER: Make sure the machine is 1. Place the dust collector near the dust producing turned off and the cord is disconnected machine on a flatlevel surface. f r o m t h e p o w e r s o u r c e b e f o r e 2.
Page 10
Changing Filter Bag and/or Cartridge 14. Maintenance Check and clean the filter cartridge/bag regularly. Servicing Replace as needed. Pull the mains plug before any adjustments, 1. Pull out handle of locking strap to release and maintenance or repair. remove locking strap. Have any work on the device that is not described in 2.
Trouble Shooting In the interests of operational safety, always switch off the saw and remove the mains plug before carrying out maintenance work. Problem Cause Remedy Device will not start 1. No mains voltage. Main circuit 1. Check the socket, mains supply breaker is tripped cable, cord, mains plug;...
Page 13
Description Description Drum 18 Right Guard Nut M5 19 Circle Sponge Flat Washer 5 20 Long Sponge Suction Inlet 21 Philips Screw M5x8 Filter Bag 22 Seal Gasket Motor 23 Filter Cartridge Philips Screw ST6.3x22 24 Locking Strap Top Cover 25 Philips Screw M5x14 Large Flat Washer 5 26 Hose Coupling 2...
Page 14
Dust Collector - Part. No. DJM01980-1 2006/42/EC Machinery Directive 2014/30/EU EMC Directive BS EN 60335-1:2012+A11+A13+A1+A14+A2 BS EN 60335-2-69:2012 BS EN 62233:2008 EN 55014-1:2017 EN 55014-2:2015 EN IEC 61000-3-2:2019 EN 61000-3-3:2013 Date:05/17/2021...
Need help?
Do you have a question about the DJM01980-1 and is the answer not in the manual?
Questions and answers