Sea Striker BRSC Assembly Instructions Manual

Sea Striker Cart Assembly Instructions
1. Attach rod holders to upper frame assembly. Tighten bolts snugly. Do not
over tighten.
2. Attach lower frame assembly to bottom of rod holders. Tighten bolts snugly.
Do not over tighten.
3. Insert handle into handle stand. Secure using bolt with washer and lock nut.
Tighten nut snugly. Do not over tighten.
4. Connect handle stand to frame assembly. Tighten nuts snugly.
5. Attach axle to lower frame assembly with U-bolts. Tighten nuts snugly. Do
not over tighten. Attach wheels to axle using washer and split ring.
For Beach Runner Deluxe Cart:
Pneumatic wheel perform best on soft sand with lower air pressure.
NOTE: Maximum tire inflation pressure is designated on the tire sidewall. Over
inflation of tires may cause serious injury. Tires are not for highway use.