Advertisement
Make your home luxury.
STEP 5: INSERT THE DRAIN BODY
Insert the drain body and washer A into the drain hole.
STEP 7: CONNECT THE TRAP
Connect the drain body to the trap.
STEP 9: CHECK FOR LEAKS
Check for leaks at connec�ons. Re�ghten if necessary.
Washer A
STEP 6: INSTALL THE DRAIN KIT
Install the tapered washer B and lock nut(D) from underneath
the sink. Tighten the nut on the drain body.
Insert the stopper(C) into the drain hole in the sink. Press down
firmly to test opera�on.
STEP 8: CONNECT WATERLINES
Connect waterlines to the hot and cold copper lines. Connect
waterlines to angle stops.
Apply pipe tape to avoid leakage. Tighten both ends of water-
lines with a wrench un�l snug. Turn on hot and cold angle stops
and check for leaks.
CARE & MAINTENANCE:
*To keep the product clean & shining, follow the steps below:
1.Rinse with clean water & dry with a so� cloth
2.Do not clean with soaps, acid polish, abrasives, or harsh cleaners
3.Do not use cloth with a coarse surface
4.Unscrew the aerator and clean when necessary
5
C: Pop up stopper
Washer A
Washer B
D: Lock nut
Advertisement
