Page 1
PURVEYORS OF FINE FREQUENCY INSTRUMENTS SINCE 1987 MODEL A MODEL A INSTRUCTION MANUALS...
Page 2
Tactio feature which makes music a whole body experience! ® JWLABS Machines are media adapters that act as transducers, which convert audio frequencies, including music, to electrical impulses the user feels as gentle vibrations or a tingling sensation. Our instruments are not FDA certified medical devices. We offer them only for general well being and entertainment purposes.
Wright Laboratories, LLC WARNINGS Check with your physician before beginning use of the device. DO NOT use this device if you have a pacemaker and/or defibril- lator or other sensor, monitor or electronic device. DO NOT use the device on children under 18 years old and do NOT allow children to use the device without adult supervision.
When using the machine with two people at a time, be sure the person who feels the current first is in charge of the amplitude setting. JWLABS devices are Media Adapters intended for General Wellness and Entertainment purposes only . They are not FDA-certified medical devices.
DO NOT let the battery drain below 50% or the device may not work properly. JWLABS devices are Media Adapters intended for General Wellness and Entertainment purposes only. These are not FDA certified medical devices.
Your Model A Start Up Kit Consists of the Following: Two sets of Electrode Wires: Input Cable (1) 6-ft set and (1) 10-ft set Quick Start Guide 2. USB Cable and Charging General Alignment CD Cube (For A3 users only) (4) White Adhesive Electrode Patches (“Softies”)
When closed, your Model A is very secure. GENERAL BACKGROUND JWLABS has been producing products since 1987 which are based on the long history of Rife technology. Originally built by hand in our workshop, our devices have long been assembled in state-of-the- art factories in the US.
This allows you to feel the frequencies of your music — a unique and multidimensional experience. You are in for a treat! All of our sessions are created on JWLABS Model B27, our analog instru- ment, and are recorded by channels A, B, C and D. The energy our machines use is a volts/amps electrical current, balanced in a way that feels good to the user.
With the exception of the General Alignment recording, the frequency range for each channel used from the Model B always corresponds to the four tracks of each session title as follows: JWLABS • A = Track 1, delivering 3 to 33 Hz Model B •...
Page 13
Wright Laboratories, LLC Our Rife sessions are divided into tracks. The lower tracks deliver the lower frequencies, moving higher as we go up in tracks, the highest being the last track of a given session. You will note a different sensation on each track at the place of contact (usually palms and/or soles of feet).
Wright Laboratories, LLC Set the amplitude to your comfort level. Feel free to adjust it at any time, given the range of frequencies you are using. You may wish to make adjustments to the amplitude, especially when you are using Music as the source of your frequencies.
Wright Laboratories, LLC generally applies to the lower tracks of any of the recordings. It’s normal to tolerate more amplitude on the higher tracks. Turn the AMPLITUDE all the way down if you pause during a session as well as between the tracks of your session. At the end of your session, turn the AMPLITUDE all the way down (counter clockwise).
Wright Laboratories, LLC Track 4 - Delivers 900 - 4,000hz (20 minute sweep) This higher mid-range of frequencies may prompt you to desire more ampli- tude. It’s okay to turn the amplitude up to a level that’s “comfortably strong”. Track 5 - Delivers 3300 - 5,000hz (5 minute sweep) These higher frequencies will feel much more subtle.
Wright Laboratories, LLC music intensifies or becomes more subdued. The display on your Model A4 will say “Tactio mode” when you are streaming music or any other ® audio signal through your machine. Tactio will bring you hours of entertainment and will provide an entirely ®...
TROUBLESHOOTING Problem: No green activity light In the A4, a failed activity light indicates For the A3, be sure that the volume that the upper section of the device of your media player is at maximum. is not communicating with the lower Computers, phones and other media section.
Models A3.3/A4.0 (Base) Wright Laboratories, LLC GETTING TO KNOW YOUR MODEL A3.3 AND A4.0 (This information is for both the Model A3.3 and Model A4.0) Power Switch This dome switch (the raised button located in the upper left corner) is illustrated with the universal symbol for power.
Wright Laboratories, LLC Operating Instructions Do NOT fully discharge the battery. For A4.0 users, we recommend re-charging when the battery icon indicates that 50% of power or less remains. Our engineers advise that the battery likes to be topped off. Input Input Jack This port allows you to provide the frequency input from an outside...
Models A3.3/A4.0 (Base) Wright Laboratories, LLC (Do not apply torque to the connection when placing or removing elec- trode wire from the port. This may damage the port of your Model A.) Activity Light ACTIVITY PLEASE NOTE This light (set in between the...
GETTING TO KNOW YOUR MODEL A4.0 TOUCHSCREEN (For instructions on the base, please see pages 20-22) Display Screen JWLABS’ touch screen will appear when the Model A4.0 is turned on. You must press the screen (not just touch) to access the menu.
Wright Laboratories, LLC Instructions Welcome Screen 1. The Battery Icon, which appears WELCOME in upper right-hand corner of the touch screen, indicates the FAVORITES A - E F - M amount of charge available. 2. Menu Selections: Favorites / A - E / F - M / N - 2 / All / N - Z G.A.
Model B. With supremely refined tuning, we have empha- sized traditional target numbers and we’ve employed sweeping tech- niques which span the entire spectrum of therapeutic frequencies. JWLABS devices are intended for General Wellness and Entertainment only. No health claims are made or implied. A15_EMI...
Page 30
Customer understands and agrees that in the event of a failure of the device, JWLABS reserves the right to repair or replace the device with another. JWLABS may replace the device with any instrument of their choosing of greater or lesser value than the original, until such time as the defective device can be permanently replaced or repaired.
Page 31
PURVEYORS OF FINE FREQUENCY INSTRUMENTS SINCE 1987 Wright Laboratories, LLC 205 E. Butterfield Road, Suite 227, Elmhurst, IL 60126 888.891.1122 • 708.356.6513 • info@jwlabs.com Visit Us Online www.jwlabs.com | www.tactio.com...
Need help?
Do you have a question about the A3 and is the answer not in the manual?
Questions and answers