Summary of Contents for AlumiGlo FlounderPro 8550
- Page 1 ™ Easy to Make FlounderPro 8550 Light and Wiring Kit Includes Pieces Shown Below Scroll Down...
- Page 2 ™ Easy to Make FlounderPro 8550 Build your own FlounderPro 8550 and SAVE $$ Use Schedule 40 PVC PVC Vertical Shaft & Handle PVC End Cap PVC Elbow 1” PVC 1” PVC 90° PVC Handle 1” PVC x 5.5” long...
- Page 3 ™ Easy to Make FlounderPro 8550 Build your own FlounderPro 8550 and SAVE $$ Use Schedule 40 PVC PVC Light Head Assembly 4-Way PVC Adaptor 1.25” PVC 45° PVC Elbow 45° PVC Elbow 1.25” PVC 1.25” PVC 2” PVC Pipe 2”...
- Page 4 ™ Lights and Wiring Harness Battery Clips 16-gauge w/S4 plug 25 ft Powercord 16-gauge w/S4 plugs 3-Way Splitter 3-Wire to 1-Wire w/S4 plugs FlounderPro 2850 30W w/S4 plug Scroll Down...
- Page 5 ™ Assembly Instructions • Slide Aluminum Mounting Bracket (7) onto Vertical 1” PVC Shaft (2) • Run “Female” end of power-cord through 1” PVC Handle Assembly and Vertical Shaft • Position the Light Head Assembly (1) below the Vertical PVC Shaft (2) •...
Need help?
Do you have a question about the FlounderPro 8550 and is the answer not in the manual?
Questions and answers