Summary of Contents for Accolmile 860C
- Page 1 Product Specification 05/2021 Product TFT LCD Display Mode Abbreviation 860C Client Customer audit...
-
Page 2: Product Name
1． Product Name TFT LCD display Model : 860C 2． Suppliers ACCOLMILE Co., Ltd. 3． Electrical Parameters 3.5inch IPS screen 24V/36V/48V/52V battery supply Rated operating current : 40mA Max operating current : 100mA (36V battery, with USB equipment changed) ... - Page 3 5． Features High-contrast 3.5inch IPS colorful matrix screen. Suitable for low temperature，Max -20℃. Ergonomic external button design, easy to operate. Speed display: AVG SPD, MAX SPD, SPEED(Real-time). Kilometer / Mile: Can be set according to customers’ habits. ...
-
Page 4: Functional Description
6． TFT screen instructions Clock Battery Brake Signal Front Light Assist level Speed Scale Speed value Power Mileage mode LOGO/ERRO 7． Functional Description POWER DOWN MENU 7.1 Power On/Off Press and hold Power button for 2 seconds can turn on/off the display. The Display can automatically shut down when there is no operate &... - Page 5 7.3 Speed & Mileage mode switch Short press MENU button change speed mileage mode, TRIP→TIME→ODO→RANGE→MAX→AVG. *Range need smart BMS support. *In MAX or AVG modes ,If there is no operation for 5 seconds, display will return Speed (Real-Time) display automatically. 7.4 Headlight/backlight On/Off Press and hold UP button for 2 seconds can turn on/off the headlight, and the screen will switch to the corresponding mode.
-
Page 6: Parameter Setting
when release the button. * This feature needs to be supported by controller. 7.6 Data clean up Press and hold UP&DOWN buttons together for 1 second can reset several temporary data, temporary data include AVG / MAX / TRIP / TIME. * These temporary data can’t be erased by power off. - Page 7 8.2 System: Press Up / Down button to switch between Metric / Imperial. 8.3 Brightness: Press Up / Down button to change the brightness of the backlight, is darkness， is brightness, default value is . Note: You can set brightness independently between Daytime mode and Night mode. 8.4 Auto off: Press UP/DOWN button to change the auto power off time, from 1 to 10/OFF, the number represent minutes to shut down, OFF means disable auto off function, default value is 5 minutes.
- Page 8 8.5 Scenes: Default Analog, Un adjustable. 8.6 Battery Ind: Press UP/DOWN button to change the battery indicator, Voltage/ Percentage/OFF.OFF Indicates that the battery display is off. 8.7 Pow Ind: Press UP/DOWN button to change the Power indicator, Power /...
- Page 9 Current/OFF. OFF Indicates that the Power display is off. * This data represent power output of the battery (not motor). 8.8 Clock: Press MENU button get into the clock setting menu, press UP/DOWN button to set Year/Month/Day/Hour/Min/Sec. Press MENU button get into the Clock menu, can show or hide the CLOCK display.
- Page 10 Note: There is a rechargeable battery inside display, it keeps the clock running when display is powered off. The battery can be charged by the external power when display is power on. This battery can maintain clock running for 100-120 days while it has not been charged. Battery may be exhausted after long time unused (after winter or transportation), you need to recharge the battery as below.
-
Page 11: Basic Setting
Basic Setting: Light sensor Wheel Battery USB Port Informations Advance Setting Factory setting *Press DOWN button to move the red arrow to , press MENU button can show all items of the Basic Setting. 8.10 Wheel: Press UP/DOWN can change the wheel setting, optional wheel diameter is 12/14/16/18/20/22/24/26/27/27.5/28/29/30/31inch,51 to 250cm (this needs controller support). - Page 12 8.12 USB Port: Press UP/DOWN level, select press OFF/ON, will be no Voltage/Current output after switching off. 8.13 Light sensor: Press MENU Button, enter into Light sensor interface; Press UP/DOWN button select OFF/ON; Select Sensitivity, press UP/Down select sensitivity of light sensation HI/MID/LO.
- Page 13 8.14 Advance setting: Press MENU button can get into the advance setting menu, default password is ‘1919’. Password entered correctly into the Advance Setting, projects shown below: Assist levels Speed limit 8.15 Speed limit: Press UP/DOWN will change speed limit, range 10km/h~60km/h/99 km/h.
- Page 14 8.17 Factory setting: Press MENU button enter Restore Factory settings item, set YES will restore all parameter to factory settings. 8.18 Informations: Show information of the E-bike. 8.19 Product infor: Get into this item can show hardware version software version…...
- Page 15 *These information needs to be supported by battery communication. 9． Error Code define 860C can show warning message, icon shows on the screen, and show error code at the bottom of the screen, definition see the table below. Error Code...
-
Page 16: Connector Descriptions
10． Assembly instructions Please pay attention to the screw’s torque value, damaged caused by excessive torque is not within the scope of the warranty. Clamps suit for 3 sizes of handlebar, 31.8mm, 25.4mm, 22.2mm, there are transfer rings for 25.4mm and 22.2mm, transfer ring must be assembled with the special directions. 11．... - Page 17 2、 Blue wire : Power cord to the controller 3、 Black wire : 4、 Green wire : RxD (controller -> display) 5、 Yellow wire : TxD (display -> controller) 12． Certification CE / IP65 (water proof) / ROHS.