CONTENTS Remote control Basic Function Main Menu Channel 1. All TV channels List 2. Favorites List 3. Radio Installation 1. DVB T Automatic installation 2. DVB T Manual Installation 3. DVB S Automatic Installation 4. DVB S Manual Installation Parents control 1.
STANDBY: Press to set STB to standby mode or recover from standby mode. MUTE: Press to turn audio on or off. 0~9: Numeric values to select the channel directly. AUDIO: Press to switch between multiple audios while watching programs. GUIDE SUB: Press to turn on / off the subtitle.
Basic Function Follow all instructions in detail if you are using the set top box for the first time: 1. Follow the diagram when you connect the STB to a television and ensure proper connection. 2. Turn on the TV and choose the right aspect ratio of TV. 3.
Channel 1. All TV channels Press [OK] button while watching program, the TV list will be displayed on the left side of screen. Use [ ] / [ ] button to choose the channel and press [OK] button to watch the channel. 2.
Installation 1. DVB T Automatic installation When you enter <Automatic Installation> in DVB-T, the STB will start an automatic search of full band of antenna signal. After searching ends, STB will automatically save scanned channels and play the first scanning channel. 2.
2. Favorites Choose <Main Menu> → <Parents> → <Favorites> or press [FAV] button directly while watching programs. Press [ ] to the next <All TV Channels>. Use [ ] / [ ] to select desired channel and press [OK] to add the channel to the favorite channel list.
Check recordings Choose <Main Menu> → <Media> → < Recordings >. Press [ ] / [ ] button to move the highlight on video list. Press [OK] button to start playing recordings in full screen mode. Note: The external large capacity hard-disk with FAT32 format is recommended for this function.
Upgrade 1. USB Update This function is used for updating software of STB by loading update code from USB storage. Copy the update file “flash_upgrade” to the USB disk, then press default password “0000”, the STB will start updating. 2. OTA Update Choose <Main Menu>...
2. Rating set This menu is used for setting the viewing grade. 3. Messages This menu is used for reading emails which will be sent by the operator. You can also press [MAIL] button to enter into this page directly while watching programs.
8. Service Info This menu is used for checking the CAS service. Entitlement info Showing the entitlement granted by operator Slot info Showing the information of purse in smartcard IPPV information Showing the IPPV channel which has been booked. AC List Info Showing user’s area code features of the operator.
Block Menu In <Block Menu> item, select “ON” or “OFF” to set the block menu function. You will need to enter the pin code when entering each menu page if you choose “ON”. Factory reset After pressing [OK] button in the <factory reset> item and inputting the password, a warning inquiry will be shown, this operation will erase all the channels that you added.
HD resolution You can change the resolution of TV output. Aspect Ratio You can change the aspect ratio in this item. TV Format You can change the TV format in this item. 3. Time Config You can set the time zone in this menu, the default time zone is +4:30.