Advertisement
Quick Links
ST950 replacement of CPU card Quick Start Guide
The ST950 CPU card replacement requires a number of steps to be successful. Unlike earlier ST controllers there is
no EPROM.
Note:1 Simply moving the Heart and Licences card to the New CPU card will not restore the Configuration.
Pre Requisites
• Spare ST950 CPU card of the correct type:
o
667/1/46010/001
o
667/1/46010/101
• Either:
o Standard Handset 'Oyster', 'Techterm' or similar
o Or Laptop/Netbook with A to B USB cable preconfigured for Web access.
o Or Wi-Fi Dongle and either a Mobile Phone or Tablet PC or Laptop/Netbook
Licence
Container
LSC (LV)
connector
Unrestricted © Yunex Limited 2022
All Rights Reserved.
can be replaced with either
must only be replaced with
Controller
Heart SD Card
Program Button
behind Level 3
access Button
667/1/46010/001
or
667/1/46010/101
667/1/46010/101
I/O, IDB, LSLS
(ELV) and Plus+
CIC connectors
Level 3
USB B connector for
access
Web interface on
Button
laptop / notebook
Page 1 of 2
Yunex Traffic
Sopers Lane, Poole, Dorset, BH17 7ER
Ethernet
Power
connector
connector
25Way D Handset
Connector
667/HQ/46000/002
May 2022 Issue 3
Advertisement
Related Manuals for YUNEX TRAFFIC ST950
Summary of Contents for YUNEX TRAFFIC ST950
- Page 1 Sopers Lane, Poole, Dorset, BH17 7ER ST950 replacement of CPU card Quick Start Guide The ST950 CPU card replacement requires a number of steps to be successful. Unlike earlier ST controllers there is no EPROM. Note:1 Simply moving the Heart and Licences card to the New CPU card will not restore the Configuration.
- Page 2 Further information on fault finding the ST950 can be found in the handbooks. Tip! It is highly recommended that whenever any changes are about to be made to an ST950 controller that a retained restore point is created prior to the change. This creates a point that can be returned to if the changes made turn out to be detrimental, even if the CPU card needs to be replaced.