Download Print this page

Advertisement

Quick Links

FISH FINDER
User Manual
SCAN THE QR CODE
to download USER MANUAL
in different languages
TUTORIAL VIDEO ON HOW TO USE
CONTACT US.
Need more help?
• Charging the wireless sonar sensor
a. Please charge the sensor first if it couldn't be turned on when it is put in the
water. The red LED light will be on when it is charging and off after being fully
charged.
• Attaching the wireless sonar sensor
a. Lock the cover of the sensor after charging to prevent damage caused by water
leakage.
b. Insert the fishing line (installed in the rod) into the hole and secure it with a
couple of knots then cast it into the water as you would in a normal float or lure.
• Powering on and off the wireless sonar sensor
a. Power on: The Advanced Wireless Sonar Sensor has built-in rechargeable
lithium battery and contacts at the bottom that perceive when it is immersed in the
water. These contacts turn on the Wireless Sonar Sensor and its fish attractive
lamp, and begin transmitting the sonar information via RF to the display of main
unit.
b. Power off: The wireless sonar sensor automatically stop working a few
seconds after being pulled out of the water.
Warning!
Discard the used wireless sonar sensor in compliance with local laws as you
would in any electronic component or battery.
FISH FINDER
ZOOM
MODE
MENU
www.danoplus.com/dp-104
Charging indicator
(Red LED light)
- 2 -
This high-quality sonar fish finder is especially designed for both professional and
novice fisherman with trouble-free use in a variety of water areas, to find out the
location of fish, and depth and bottom contour of water. It can be used in ocean,
river, or lake, and is fantastic for detecting schools of fish in any particular area.
Simply attach the wireless sonar sensor to the end of your fishing line and cast it
into the water as you would in a normal float or lure, then power on the main unit
and you are ready to fish. The fish finder uses sonar technology to send sound
waves from the wireless sonar sensor into the water.
The returned "echoes" are transmitted with wireless technology to the display unit
and plotted on the LCD. New information appears on the right. As this information
moves to the left, a very accurate picture of the underwater world is created,
including the depth of underwater objects such as the bottom, fish, and structures.
Sensor connected indicator
Sensitivity
Water depth
Water Temperature
Fish icon with depth
Bottom contour
WARNING!
1. Shock from the abrupt contact with rocks can damage your sensor and the
erratic readings may occur in shallow water, we recommend to use your
sensor in water deeper than 2 feet (0.7 meters) only.
2. In addition, because of the nature of sonar, this product is not intended to use
in swimming pools or small enclosed bodies of water.
1. USING THE WIRELESS SONAR SENSOR
Working indicator
(Blue LED light)
Charging port
Hole for fishing line
NOTE: When the wireless sonar sensor supplied in the set is broken and you
have to replace, the new sonar sensor need to re-code before using.
.
Re-code procedures as below:
a. Place the new wireless sonar sensor in
the water to turn on.
FISH FINDER
MENU
b. Press the
button to power on the
main unit and enter the normal detection
interface (Wireless mode).
c. Press and hold the
then release. The number at the top of the screen starts to count from
1 to 16.
ZOOM
Press
MENU
.
and hold
d. When the number stops counting, it indicates that the re-coded is
successfully. The number that stays is the corresponding code of the main
unit and the probe, and the detection information will appear on the screen.
2. USING THE MAIN UNIT
Antenna
LCD display
.
.
Zoom Button
Left Arrow Button
.
Power / Menu Button
INTENDED USE
OPERATION
SCREEN DISPLAY DETAILS
Battery Indicator
Depth upper limit
Water surface
Depth lower limit
SENSOR DETAILS
Charging indicator
(Red LED light)
Contacts
- 1 -
User mode
Wireless
button on the main unit, wait for 4 beeps and
number 1-16 loading
FISH FINDER
MODE
MAIN UNIT DETAILS
ZOOM
MODE
MENU
FISH FINDER
Mode Button
ZOOM
MODE
MENU
Right Arrow Button
- 3 -
.
Fish attractive
lamp
.
Wireless
Sensor
Water

Advertisement

loading

Summary of Contents for DANOPLUS DP-104

  • Page 1 (Red LED light) TUTORIAL VIDEO ON HOW TO USE Charging port CONTACT US. Need more help? www.danoplus.com/dp-104 Hole for fishing line Contacts - 1 - • Charging the wireless sonar sensor a. Please charge the sensor first if it couldn't be turned on when it is put in the NOTE: When the wireless sonar sensor supplied in the set is broken and you water.
  • Page 2 Powering ON and OFF • Press the button until Depth upper limit appears, Off (0 meter) is the MENU a. Short press the button to turn on the main unit. default setting. MENU Depth upper b. When the main unit powers on, the user mode menu temporarily appears. From However in some certain situation, you could limit this menu, press the...