MR Marine Electronics OCEAN M60 Quick Start Manual

Advertisement

1. Select a location for the ODU

2. Remove Bottom Screw

Remove

3. Mount the ODU

The antenna requires a clear view of
the sky to receive satellite TV, The
fewer obstructions, the better the
system will perform
In addition, the antenna should be far
away from the mast and radar
Remove a hexagon screw at the

4. Mount the IDU

bottom of base
Drill the mounting holes and cable
access hole to prepare the site for
installation

5. Wiring Diagram

Secure the antenna to the mount base
using bolts,spring washers,and the flat
washers,lock nut.
Dry place is required for IDU to be
mounted
Drill the mounting holes prepare the
site for installation.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OCEAN M60 and is the answer not in the manual?

Questions and answers

Summary of Contents for MR Marine Electronics OCEAN M60

  • Page 1 1. Select a location for the ODU The antenna requires a clear view of Secure the antenna to the mount base the sky to receive satellite TV, The using bolts,spring washers,and the flat fewer obstructions, the better the washers,lock nut. system will perform In addition, the antenna should be far away from the mast and radar...
  • Page 2 C: INTELSAT 19 And it will return to Normal Mode automatically at the same time. 8. Turn Off System Press Power can turn off the system MR Marine Electronics Group Address: 2 Massey Street Gladesville NSW,Australia http://www.oceantv.com.au sales@oceantv.com.au Tel:61-428250520 Contact: Mark Rothwell...

Table of Contents