Summary of Contents for aevit DIGIPAD II
- Page 1 LIT-PWRHR-030510-REV3 DIGIPAD II Power Headrest Installation Guide 26 Gabriel Drive • Augusta, ME • Phone: (207) 512-8009 • Fax: (207) 512-8049 • www.aevit.com...
- Page 2 Power Headrest Packing List Accessory Kit Fab-Lok (4) Power Headrest Actuator Setscrew (7) 5/64 Allen Wrench Installation Manual Owner’s Manual Power Headrest-0 Power Headrest-1 Power Headrest-6 Headpad Single Button Headpad Six Button Headpad...
- Page 3 Overview The EMC line of Power headrests gives individuals head support along with a variety of switching options when the OEM headrest is removed. EMC offers three (3) types of headrests. The six-button power headrest allows the driver to access up to six (6) different, low-effort switches positioned on the headrest. This is typically used in conjunction with EMC’s two (2) button control modules to activate functions such as turn signals, horn, dimmer, wiper low, wiper wash, cruise on, cruise set or any number of auxiliary operations.
- Page 4 Installation Preparing the Vehicle Begin by fitting the driver to the driving compartment which includes installing all tiedown restraint systems. When complete, remove all plastic or metal mouldings around the upper door opening and rearward of the “B” pillar on the side wall header panel. You may have to remove the shoulder strap retaining bolt in order to remove the molding.
- Page 5 If you use this unit in conjunction with a Digipad II Gold Series or Econo Series, the Power Headrest can be operated from one (1) of the auxiliary function. Refer to the auxiliary wiring section of your Digipad II console installation manual for details.
- Page 6 Power Headrest-6 Before you wire the headrest, first follow the instructions included with the ELB Control Modules to install the harnesses directly to the vehicle. Then, simply plug the telco cables from the Power Headrest into the appro- priate ELB Control Module. The switches on the Power Headrest-6 are not labeled, therefore, you can connect to any control module.
- Page 7 Purchaser must maintain and service the product and comply with all against defects in materials or workmanship only as set forth below. cautions, precautions and warnings as set forth in the AEVIT Owner’s Manuals. This warranty is void if the service schedule, cautions, pre- WARRANTY PERIOD cautions or warnings are not followed.
Need help?
Do you have a question about the DIGIPAD II and is the answer not in the manual?
Questions and answers