Contents • Chapter 1: Glance of Land Explorer Binocular • Land Explorer Binocular Overview • Accessories • Buttons • Battery recharge • Calibration sensors • Warring • Chapter 2:Getting Started • Search APP on iTunes and Google Stores • Download and Install ViewTarget Pilot APP •...
Buttons S1 button: Power on/Power off by press 5 seconds. Press with S2 button together for calibration sensors. S2 button: Press 5 seconds for locating Targets. Press 1 click for mobile speak out the distance of Targets. Press with S1 button together for calibration sensors. Battery recharge For the first time use , the binocular should be charge battery till the charging Battery LED turn off.
Tactical Master When you watched something, the general GPS can’t support you the viewed target’s position , this View Target Pilot will access to locate the viewed Target’s waypoint. Choose Tactical Master Tap Location icon direct to Locate targets. to locate targets. Locating viewed targets (stand two place to spot target to locate it’s waypoint, the distance of two standing place should be more than 15 meters) Spot target and...
Land Explore Type the target’s coordinate or address name and even you can choose an POI from View Target Waypoints list, the View Target Pilot will guide your Land Explorer Binocular or ViewTarget Pilot Plus to spot this target. Choose Land Explorer division, your handed Land Explorer Binocular can be guided to spot any target which you interested .
Page 11
Free tap a POI on the map with 2 seconds, the smart View Target Pilot will Guide your handed Land Explorer to spot this target. For more clear to hear, we make the speaker be max. If you want to make voice lower, click the voice control button of your mobile phone and adjust the music volume control.
Page 12
On Land Explorer division, tap the place of your interested POI on map, and done it , the red guide line will guide your scope to spot this target. Tap POI mark icon to ViewTarget Waypoints list. You also can make 30 seconds’ Voice Note for the ViewTarget Waypoint.
Page 13
Tap Track this ViewTarget, the last target will keep the mark on the map for you spot it again. Tap Cancel this ViewTarget, the mark of last target will be deleted.
Share Targets ‘ POI Airdrop Targets’ POI to buddies Pair Bluetooth of the sending and receiving mobile to link before this activity will be done. Tap Airdrop this ViewTarget icon, and ADD Buddies of the paired device, Done Airdrop . For the receiving device, tap Yes to receive the target POI of sender, this POI will guide the receiver’s scope to spot this target.
Social Network Share Share the ViewTarget waypoints by Social Network Facebook, Twitter, Link in , Google+, Pinterest and Email. Choose target waypoint from the ViewTarget Waypoints list. Tap Social Network Share icon. All the ViewTarget Waypoint can be share on Facebook, Twitter, Linked in, Google+, Pinterest and Email.
Capture Target Viewed When no internet connection, or you want to capture the picture of viewed target, access binocular adapter to capture pictures of viewed target with POI.
Page 17
Access the binocular camera adapter, you can capture the viewed target with it’s compass information and you location waypoint.
Safety Important safety information WARRING: • Never use the scopes when looking directly at the Sun, it is dangerous for your eyes. • Never put scopes in a high temperature place, temperature must not exceed more than 60 • The Global Positioning System( GPS) is subject to changes which could affect the accuracy and performance of all GPS equipment.
Need help?
Do you have a question about the ViewTarget Pilot Series and is the answer not in the manual?
Questions and answers