Quilt Display Products WALL HANGER Instructions

Table of Contents

Download this manual

QUILT WALL HANGER

COMMITMENT TO EXCELLENCE

We want you to be pleased with our products and our service, so if you need verbal

assistance with the assembly or hanging of any of our quilt display products or if you have

any suggestions on what we can do to improve our service to you, please feel free to

By phone at (937) 506-0032, by e-mail at info@quiltdisplayproducts.com or by visiting

our website at www.quiltdisplayproducts.com.

EXAMINE THE PACKAGE CONTENTS

Carefully examine the contents of this package. If you suspect that there is damage or

missing parts, contact Quilt Display Products at (937) 506-0032 between the hours of

8:00 AM and 5:00 PM Eastern Standard Time for directions on how to proceed. Please

keep the original package and packing material in the event that you need to return the

product to us.

Make note of the existence of the following contents.

1. Quilt Wall Hanger (front and back assembled with screws)

2. One small bag containing:

a. Two Metal Wall Anchors (E-Z Ancor™)

b. Two Screws

c. Two Wooden Supports with Holes

Begin with Step 1 on the next page and follow the directions exactly. All of our wall hangers

are designed to hold about 80 lbs, so they should be secure enough for even your largest

quilt. When you have finished hanging your quilt wall hanger, stand back and enjoy your

accomplishment!

●

Customer Service 937-506-0032

●

www.quiltdisplayproducts.com

Table of Contents

Do you have a question about the WALL HANGER and is the answer not in the manual?

Page 1 We want you to be pleased with our products and our service, so if you need verbal assistance with the assembly or hanging of any of our quilt display products or if you have any suggestions on what we can do to improve our service to you, please feel free to contact us in any way listed here: By phone at (937) 506-0032, by e-mail at info@quiltdisplayproducts.com or by visiting...
Page 2 Mark two locations on the wall at the same height “H” from the ceiling where you want to mount your wall hanger. The distance “D” between these marks needs to be the same as the distance “D” between the centers of the mounting features on the back of your wall hanger.
Page 3 The side with the recessed hole is the one through which the screw is inserted. Be sure the sharp edge is parallel with the ceiling when tightening the screw. Copyright 2016 Quilt Display Products ● Customer Service 937-506-0032 ●...
Page 4 You should be looking at the back of the quilt at this point. Center your quilt in the wall hanger and make sure no part of it interferes with the screw inserts.
Page 5 HANGING INSTRUCTIONS Step 5 Place your wall hanger on the two wooden supports you attached to your wall earlier, by lowering it onto them so that the two beveled surfaces interlock providing a secure connection. Copyright 2016 Quilt Display Products ●...