Summary of Contents for Solebe Smartlock Y801
- Page 1 Y801 Owner’s Manual 115dB 115dB Smart Auto-search vibrating alarm Waterproof Alarm sound Patent number：201620461844.0...
- Page 2 Sketch Map LED cover Lock/Unlock button Buzzer Reset Lockpin charge port Note: if the lock’s bluetooth signal disappears, please press the reset button to restart it. (This operation won’t change anything such as password) Product Standard 74mm * SIZE：74X36X58mm * Lockpin diameter : 5.5mm * Product weight: 350g * Material: zinc alloy+stainless steel * Working temperature: -10℃~+60℃...
-
Page 3: App Download
APP download • IOS 7.0 and Android 6.0 or above. Android • Search solebe in • http://d.7short.com/solebe • Search solebe in APP store. Google Play. • Better to learn about the instruction and troubleshooting after installing the APP. - Page 4 Power • 3.7V 350mA polymer rechargeable battery. • 5V charging by connecting with computer, mobile phone charger, power bank ect. • The red light will be on while charging and off when fully charged. • Once the battery is lower than 20%，there will be 3 serial sounds DiDiDi when unlock, if less than 5%, will unable to lock when you press the lock/unlock button,...
- Page 5 Pairing 1. Open the app , click “+” to search device. (only can pair when in lock mode) 2. Enter the password (default password is 123456), then it will shows connected.
- Page 6 Unlock • Click “ ” on the APP, the lock’s blue light will be on, then press the Unlock “ ” , the APP will show Disconnected. Setting • There is introduction of function and settings on setting page, please click “...
-
Page 7: Troubleshooting
Troubleshooting 1. Unable to lock Reasons: Solutions: a. Too low battery. a. Charge it and try it again. b. The program is stuck. b. Please click the reset button. 2. Fail to pair Reasons: Solutions: a. unlocked status. a. Press the lock button till hearing 2 Di Di b. -
Page 8: Fcc Statement
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Need help?
Do you have a question about the Smartlock Y801 and is the answer not in the manual?
Questions and answers